EMX Industries, Inc. CS 202-S-5-50 Carsense 202 Slim Driveway Sensor

EMX Industries, Inc. CS 202-S-5-50 Carsense 202 Slim Driveway Sensor

Single Piece Buried Motion Sensor with Slim Design and 1.5mA Standby Current
  • Single piece design provides the installer with a simple installation procedure
  • Buried in the ground, so it will not be noticed by a potential intruder or vandals
  • Accepts a wide range of input power: 9 Volts to 35 Volts AC or DC
  • Low current consumption of 1.5mA standby and 15mA detected make it ideal for solar applications



List Price: $199.99

Your Savings: $72.20

REWARDS: 127 points
  • Details
  • Specs
  • Reviews
  • The CarSense sensor uses passive probe technology to detect changes in the earth's magnetic field. These changes are caused by movement of ferrous metal objects, such as a car, in the proximity of the probe. The sensing area of each probe is in the shape of a 15 foot circle. The size of this sensing area changes with the mass and speed of the moving vehicle. This 5-wire version has a 50 foot lead-in wire.

    • Safety - detects moving vehicles in an industrial environment where there are blind areas along the driving path and actuates warning lights.
    • Energy conservation - detects moving vehicles along a driving path in a warehouse and turns on lights only in the proximity of the vehicle.
    • Security - detects approaching vehicles or an unauthorized movement of a parked vehicle and actuates alarms, video cameras, or vehicle annunciator.
    • Access control - "free exit" vehicle detector for gates, overhead doors, or parking barriers.
    Note: the CarSense sensor should not be used for presence detection applications.

    The CarSense 202 can be buried in the ground about 8-10 inches deep parallel to the driveway. It may also be placed 2 inches deep in asphalt or concrete under the path of the vehicle. In all cases the probe must remain totally motionless and be free of vibration to prevent false detects. The lead-in cable must be protected from any damage to its outer insulation.

  • Power Supply: 9 - 35 Volts AC/DC +/- 10%
    Stand-by Current: 1.5 mA maximum
    Detect Current: 15 mA maximum
    Relay Type: DPDT
    Relay Contact rating: 1A 24V DC 120 V AC
    Surge Protection: MOV, Neon, and Silicon protection devices
  • 1 Review

    Review of 7211 Review by DALE
    Review of 7211

    Exactly what I had ordered. Very quick
    delivery and service.
    I always enjoy doing business with Amazon and their partners!

    Posted on 7/12/2013

    Leave a Review

    Only registered users can write reviews. Please, log in or register

Please wait...