Elk M1KAM M1 Single Door Access Module

Elk M1KAM M1 Single Door Access Module

Arm or Disarm Your M1 Panel Without Using a Keypad or PIN Codes
  • Replaces traditional keypads
  • Connects with wiegand reader for keyfob and card swipe access
  • Multiple input and output contacts



List Price: $149.99

Your Savings: $18.39

REWARDS: 131 points
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • The Elk Single Door Access Control Module is designed for use with Elk Security Systems to provide an increased level of security that basic M1 Keypads can't offer. It offers an alternative to requiring users to remember PIN codes as the module connects to your Elk M1 Security System, and with the addition of an Elk Ultra Prox Weigand Reader, you can issue Keyfobs or Access Cards to users for entry. The maximum number of access modules that can be placed on a system is 16, minus any installed keypads. This unit also includes a relay (door unlock) output, a request to exit (RTE) input, a door contact sensor input, a Door Held Open Alarm output, a voltage output for System Ready to Arm, and it accepts Dallas "One-Wire" iButton readers/devices. The M1 Single Door Access Module can be mounted using a universal surface mount plastic housing that has knockouts for surface mount raceways

    • Input for a 26 bit Wiegand Reader
    • Input for a Dallas "One-Wire" iButton Reader
    • Heavy Duty Form "C" Relay Contacts for Switching Door Strike Power
    • Low Current (50mA) Switched Negative (pull to ground) Output for Door Held Open Alarm
    • Low Current (10mA) Switched Negative (pull to ground) Output for System Ready To Arm indication
    • Low Current (10mA) Switched Negative (pull to ground) Output for System Armed indication
    • Supervised Input for RTE (Request To Exit) Button/Device
    • Supervised Input for Door Status Sensor
    • Installs in place of an M1 Keypad and operates from the RS-485 4-Wire Keypad Data Bus
    • Four selectable Time settings for "Request to Exit" and "Door Held Open"
    • Hardware Watchdog Circuit

  • Specifications

    Manufacturer: Elk
    Manufacturer Product No.: M1KAM
    Operating Voltage: 13.8 VDC
    Current Draw: Less than 30 mA with min. activity, 44 mA fully active
    Barrel Connector: 2.1 mm coaxial secure-fit plug
    Housing Dimensions: 4.25" x 6.375" x 2.125"
    Circuit Board Dimensions: 3.95" x 2.875" x .95"
    Connections: Unpluggable Screw Terminals, 16 Position
    Maximum number of access modules and keypads per system: 16 (minus the number of keypads)

  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • M1 Single Door Access Module
    • Instruction Manual

Please wait...