Elk ELK-6022 Two-Way Wireless Universal 3-Zone Sensor

Increase Your Elk Home Security System with this Wireless Sensor for Detecting Intrusion
  • Compatible with the ELK-M1XRFTW Two-Way Wireless Transceiver
  • Uses Two-Way Wireless Technology with 902 Mhz - 928 Mhz frequency hopping
  • Zones: Built-in reed, IN1, and IN3 (closed circuit terminals)
  • Front and back tamper option
  • Maximum operating gap of reed: 1/2"
  • Battery Operated (3V CR123A lithium battery)


  • Details
  • Specs
  • Reviews
  • What's Included
  • The ELK-6022 Wireless Universal 3-Zone Sensor is capable of securing up to 3 openings. It features Elk's Industry Leading Two-Way Technology with on-demand status updates, extended range and long battery life. The 6022 provides a built-in reed switch plus 2 aux. terminal inputs (LP1 & LP3). It works with Wireless Transceivers and Controls that accept Elk's two-way technology; such as, the ELK-M1XRFTW. The 6022 transmits a unique TXID identifier plus one of 3 Loop numbers, one for each input zone. The Loop number is used by the control to determine which input is assigned to which wireless zone.

    More About ELK Two-Way Wireless Technology
    The ONLY Way is Two-Way! ELK's industry leading two-way wireless technology for the M1 Control revolutionizes the reliability and functionality of wireless peripherals for homes and businesses. Full, true two-way signal acknowledgement ensures verification of the current state of all sensors through active two-way auto sync. It assures installation confidence through signal quality and status. There are LED indicators that verify communication. The units constantly monitor and adjusts ideal RF power level to deliver clear signal while maximizing battery life. The technology utilizes 900 MHz frequency-hopping spread spectrum to increase signal diversity and agility to make sure that signal gets through.

  • Specifications
    Manufacturer Elk Products
    Manufacturer Product No. ELK-6022
    UPC 762158160226
    Frequency 902 Mhz - 928 Mhz frequency hopping
    Zones Built-in Reed + LP1 & LP3 Auxiliary Inputs (terminals)
    Tamper Field installed plunger for front and back detection
    Auto-Sync Type B
    Dimensions 1.50" W x 3.00" L x 0.90" D (Magnet: 0.57" W x 1.50" L x 0.60" D
    Maximum Operating Gap of Reed 1/2"
    Operating Temperature 14° to 104° F (-10° to 40° C)
    Relative Humidity 5-95% Non-Condensing
    Battery 3V CR123A Lithium
    Unique TXID Code Over 1 million combinations

  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - Sensor Set
    • Owner's Manual

Please wait...