DSC BV-600/UL Twin PIR Motion Sensor

DSC BV-600/UL Twin PIR Motion Sensor

Put a Stop to False Alarms Caused by Pets!
  • Double protection against false alarms



List Price: $39.99

Your Savings: $19.99

REWARDS: 20 points
  • Details
  • Specs
  • Reviews
  • What's Included
  • If your pets are always setting of your alarm system, try this motion sensor containing special technology to differentiate between humans and pets.

    This sensor contains TWO PIR motion sensors plus a special lens to create the greatest immunity against false alarms caused by pets. Can differentiate between pets under 2.5° up to 85 lbs and humans, and can be set to operate in a "normal" environment (containing a pet lower than 1.2°) or a "harsh" environment (containing larger or multiple pets). Circuit board can be moved up and down to adjust coverage. LED on the unit can be turned on or off. 100 degree coverage at 40 ft. Five-year warranty. Mounts with included screws.

  • Specifications

    DSC Product No.: BV-600/UL
    Operating voltage: 9.5 VDC to 14.5 VDC
    Supply voltage ripple: 3.0 VP-P @ 12 VDC
    Stand-by current: 17.5 mA
    Current in alarm (LED on): 25 mA
    Contact rating (alarm & tamper): 100 mA @ 24 VDC
    Alarm contact resistor in common: 10 ohm 0.25 W
    Operating temperature: 32°F to 122°F / 0°C to 50°C
    Storage temperature: -40°F to 140°F / -40°C to 60°C
    Operating humidity: 5% to 85% RH non-condensing
    Storage humidity: up to 99% RH non-condensing
    Static immunity: 10 kV
    Transient immunity: 2.4 kV @ 1.2 joules
    Walk detection speed: 0.5'/s to 10'/s (0.15 m/s to 3 m/s)
    Coverage angle (wall/wall lens): 100° maximum
    Vertical adjustment: +5° to -10°
    Mounting heights: 6' to 10.5' / 1.5m to 3.2m (nominal 7.5' / 2.3m)
    Dimensions: 4.6" H x 2.76" W x 1.75" D (124.5 mm x 70mm x 44.5 mm)

  • 4 Reviews

    Review of 7498D Review by TIM
    Review of 7498D

    Easy to install, watch out if your 60 lb. dog jumps on the couch it will set it off if it is within 7' of detector.works great otherwise.

    Posted on 2/21/2010

    Review of 7498D Review by SCOTT
    Review of 7498D

    i would love to give this item a 5-star rating, but i can't because i bought to replace the same model which stopped working. otherwise, the sensor works great. we have animals in the house but have never had a false alarm. it wired up to our alarm system with minimal drama.

    Posted on 12/11/2009

    Review of 7498D Review by JOHN
    Review of 7498D

    This was the 2nd motion sencor that I ordered from you and I have been very satisfied with them,

    Posted on 4/5/2008

    Review of 7498D Review by MARTIN
    Review of 7498D

    The laser emmiters need to "spread" more for larger garages. I had to use a utility knife to notch the sockets the emmiters are mounted in to allow a wider spread.

    Posted on 12/15/2007

    Leave a Review

    Only registered users can write reviews. Please, log in or register

    • Twin PIR Motion Sensor - BV-600/UL

Please wait...