Insteon Remote Control DIN Rail On/Off Switch

InsteonSKU: 2453-222
filler

Multi-Pack Savings Available: Each
Price:
$49.99

Description

When planning the electrical wiring for your home or business, avoid adding too many wall switches in a single location. Wall switches ganged together cause homeowner confusion and can quickly ruin the aesthetic of a room. Instead consider adding a single Insteon keypad to control all the lighting. It's easy when combined with Insteon DIN Rail products.

Use of DIN rails is common overseas and in US commercial/industrial buildings. Because of their ease of installation, DIN rails are becoming more popular in the US. DIN rail products provide integrators and builders a more custom and organized way to handle complicated wiring circuits.

The DIN Rail On/Off clips directly onto a 35mm DIN rail and wires to load, power and neutral. Link it to an Insteon keypad or any other Insteon device for full remote control over the module and it's connected load. Specifically, DIN Rail On/Off is compatible with the "Top hat rail EN 50022" (sometimes referred to as a Type O or Type Ω) The DIN Rail On/Off will fit either variation of this style DIN rail (either 15 or 7.5 mm "high" off the mounting surface).

What's a DIN Rail?

It is simply a metal rail on which compatible products (circuit breakers, switches, etc.) can be snapped on. The DIN rail can simply be mounted to any flat surface (or even across studs). Please follow all applicable building and electrical codes whenever installing electrical products.

Optional Sense Wire Trigger

The DIN Rail On/Off features sense inputs for special applications where a local "dumb" switch might be necessary in addition to remote Insteon control. Sense inputs are compatible with latching, single momentary and dual momentary wall switches. Connect to any style wall switch to match any type of designer theme (antique, push-button, metal, etc.)

Local Control and Insteon Setup

The DIN Rail On/Off has a small paddle that operates exactly the same as the best-selling SwitchLinc paddles. So, you can turn the connected load on or off by tapping the paddle. Furthermore, a setup button is provided for setting up other properties as well as for linking and un-linking. Finally a dual-color (green and red) LED displays the on (green) or off (red) status of the connected load.

General
Manufacturer Insteon
Manufacturer Product No. 2453-222 - (Each)
2453-222-5PK - (5-Pack)
UPC 813922019674 - (Each)
813922019674 - (5-Pack)
Safety Approval(s) ETL
Certifications FCC
FCC ID SBPDR01
Warranty 2 Years
Insteon Features
Operation Modes Controller and responder
Maximum Links/Scenes 400
Load Brightness Levels 32 locally (256 with software)
Status LED Green when load is on, Red when load is off
Blinks Red once when responder does not acknowledge/blinks
Green once if all responders acknowledge (can be disabled via software)
Blinks Green or Red during setup
Blinks Red or Green (depending upon state of load) to indicate traffic (must be enabled via software
LED Brightness Adjustable from off to 100% bright
Local Control Yes
Commands Supported s Controller On | Off
Fast On | Fast Off
Begin Brighten | End Brighten
Begin Dim | End Dim
Commands Supported as Responder On | Off
Fast On | Fast Off
Beep
Software Configurable Yes
RF Range 150 ft. (depending on your home’s construction)
Phase Detect Beacon Yes
Insteon Device Category 0x02 switched lighting control (all frequencies)
Insteon Device Subcategory 2453-222 (915MHz) | 0x2E
Mechanical
Mounting 35mm (top hat) DIN rail
Wire Connections N/A
Max. Cable Size 4mm², 12 AWG (2.72mm diameter)
Min. Cable Size 1.5mm², 15 AWG
Screw DIN Rail Connections Line
Neutral
Load
Sense 1
Sense 2
Case Color White
Set Button Yes
Plastic UV stabilized polycarbonate
Beeper Yes
Beep On Button Press Optional (off by default)
LED 1 RGB
Dimensions(H x W x D) 3.14" x 2.05" x 2.48"
Weight 6.17 oz (175g)
Operating Environment Indoors
Operating Temperature Range 32° to 104°F (0° to 40°C)
Operating Humidity Range 0-90% relative humidity
Storage Temperature Range -4° to 158°F (-20° to 70°C)
Electrical
Voltage 100VAC to 240VAC
Frequency 50/60Hz auto-detected at power-up
Load Type(s) Resistive
Inductive/capacitive
Low voltage halogen
Maximum load US 15A – 240VAC
EU 16A – 240VAC
AUS/NZ 10A – 240VAC
3600W/240VAC Resistive
700W/240VAC Inductive/Capacitive
2000W/240VAC Bulbs/Low Voltage Halogen
User Replaceable Fuse Yes, (16 A (T)) 5x20mm fuse
Hardwired Remote Control Yes, either latching or momentary switches supported
Retain All Settings Without Power Yes, saved in non-volatile EEPROM
Standby Power Consumption <1W
  • 1x - Insteon Din Rail On/Off
  • 1x - Quick Start Guide

Customer Reviews

Based on 12 reviews Write a review

Payment & Security

Amazon American Express Apple Pay Discover Google Pay Mastercard PayPal Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed