CNB Technology INS2000 1channel Network Video Server

Convert Your Analog Surveillance Camera to an IP Network Camera
  • Supports Power over Ethernet (PoE)
  • Supports two-way audio
  • Alarm input & output
  • Local storage SD card slot
  • NTSC or PAL



List Price: $422.00

Your Savings: $111.35

  • Details
  • Specs
  • Reviews
  • What's Included
  • This Network Video Server will breathe new life into an existing analog surveillance camera. Connect a BNC video feed and plug into your network, and you can now stream video (H.264 and MJPEG) over the internet. There's a video out BNC connection for live viewing on a monitor. The included XNET software can activate an event trigger upon detecting motion. Install an SD card up to 4GB for local storage of pre- or post-alarm events. Supports PoE to simplify camera installation. There are an audio input and output for two-way voice communication if desired. Use the alarm input to activate the server and camera, or use the alarm output to trigger an external alarm device upon detecting motion. Five LEDs indicate the status of the server: proper network connection, proper XNET connection, video loss, events, and power. Use the included RS-485 connection to pass pan/tilt commands. Flexible power options: use either 12VDC or PoE. WARNING: Do not plug in both PoE and 12VDC power simultaneously. Doing so will damage the server, voiding its warranty.

    XNET Software
    XNET is an internet based security and surveillance system that is compatible with various network conditions through easy installation and user interface as well as multi-functional compression codecs, such as MJPEG, MPEG-4, and H.264. XNET provides stable real-time surveillance by real time video/ audio at D1 level, local storage for any network problems, and hybrid IP technology that can be used with existing analog CCTV devices.

    • Advanced compression technology: H.264, MJPEG, MPEG4, ADPC/G726
    • Progressive scan gives clear images without ghosting
    • Hybrid IP technology allows CCTV analog output
    • Multi-codec streaming allows live video simultaneously using H.264, MJPEG, and MPEG4
    • Two-way voice communication using a client PC and XNET
    • Smart Event records video before and after an alarm event
    • Install / Operation Wizard makes installation easy and offers users an easy interface
    • Three motion detection areas
    • Motion Detection Events sends video & audio to an FTP site or email upon an alarm trigger or detecting motion
    • Supports various resolutions: NTSC 704x480, 352x240 PAL: 704x576, 352x288
    • RS-485 interface for remote pan/tilt control
    • Remote software upgrade via your network

  • Specifications
    Manufacturer CNB Technology
    Manufacturer Product No. INS2000
    Video Input Signal 1-ch BNC composite
    Video Signal Select NTSC or PAL
    Video Output Level 1-ch Video Loop Back (BNC, 75Ω, composite
    Main Processor 32-bit Embedded CPU with Linux
    System Memory NAND Flash: 64MB, 128MB DDR
    SD Card: up to 4GB
    Compression MJPEG, MPEG4, H.264
    Frame Rate Dual Mode: MJPEG 15fps NTSC/PAL
    MPEG4, H.264 30fps NTSC, 25fps PAL
    Resolution D1 (NTSC: 704 x 480 / PAL: 704 x 576)
    CIF (NTSC : 320 x 240 / PAL: 352 x 288)
    Video Streaming MJPEG / MPEG4 (or H.264) Dual mode
    Constant and variable bit rate in MPEG4 (128kbps ~ 3M bps)
    Controllable frame rate and bandwidth
    Image Settings Compression Level Setting
    Configurable Brightness, Sharpness, White balance
    Audio Two-way Full Duplex / ADPCM G.726
    Network Protocol IPv4, HTTP, TCP, RTSP, RTP, RTCP, UDP, SMTP, FTP, ICMP, DHCP, UPnP, Bonjour, ARP, DNS, DynDNS
    Supported DDNS CNB DDNS
    Reference code with SDK
    Video Access from Browser Camera live view for up to 10 clients
    LAN Interface Ethernet 10/100 BaseT (RJ-45)
    Support PoE Standard IEEE 802.3af
    Access Level Setup Multiple user access levels with password protection
    Network Security IP Filtering
    Image Detection 3 Regions of Motion Detection
    Sensor Detection Sensor In, Scheduling, Alarm Out
    After Event Process JPEG Image Upload over FTP Server
    SMTP (email server)
    Local Storage JPEG image write to internal & SD memory
    Internal Memory: max 32MB
    SD Memory: max 4GB
    Pre / Post Alarm Detail time set: max pre-alarm 5 sec, post-alarm 8 sec
    Browser IE 6.0 or above
    Upgrades Firmware upgrade over HTTP
    Onvif Compliant Yes
    Operating Temperature 14° to 104&degF (-10° to 40°C)
    Power Requirement 12VDC, 5W
  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - 1-Channel Video Server
    • 1x - AC Power Adapter
    • 1x - AC Power Cord
    • 1x - CD Software & Manual

Please wait...