CNB Technology IJB2000 1Channel IP Video Server for Weatherproof Cameras

CNB Technology IJB2000 1Channel IP Video Server for Weatherproof Cameras

Convert Your Analog Outdoor Surveillance Camera to an IP Network Camera
  • Supports both NTSC and PAL
  • Power over Ethernet
  • Local storage SD card slot
  • Mates perfectly to the outdoor camera mounting brackets



List Price: $457.00

Your Savings: $171.24

REWARDS: 285 points
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • This Network Video Server is designed for use with weatherproof outdoor cameras. The housing design mates perfectly with the base of most cameras' mounting brackets for a seamless look. Connect a BNC video feed and plug into your network, and you can now stream video (H.264 and MJPEG) over the internet. There's a video out BNC connection for live viewing on a monitor. The included XNET software can activate an event trigger upon detecting motion and many other functions. An internal 32MB memory and optional SD card up to 4GB provide local storage of pre- or post-alarm events. Supports Power over Ethernet (PoE) to simplify camera installation. There are audio input and output jacks for two-way voice communication if desired. Use the alarm input to activate the server and camera, or use the alarm output to trigger an external alarm device upon detecting motion. Use the included RS-485 connection to pass pan/tilt commands. Flexible power options: use either 12VDC or PoE. WARNING: Do not plug in both PoE and 12VDC power simultaneously. Doing so will damage the server, voiding its warranty.

    XNET Software
    XNET is an internet-based security and surveillance system that is compatible with various network conditions through easy installation and user interface as well as multi-functional compression codecs, such as MJPEG, MPEG-4, and H.264. XNET provides stable real-time surveillance by real time video/ audio at D1 level, local storage for any network problems, and hybrid IP technology that can be used with existing analog CCTV devices.

    XNET Software Features:
    • Advanced compression technology: H.264, MJPEG, MPEG4, ADPC/G726
    • Progressive scan gives clear images without ghosting
    • Hybrid IP technology allows CCTV analog output
    • Multi-codec streaming allows live video simultaneously using H.264, MJPEG, and MPEG4
    • Two-way voice communication using a client PC and XNET
    • Smart Event records video before and after an alarm event
    • Install / Operation Wizard makes installation easy and offers users an easy interface
    • Three motion detection areas
    • Motion Detection Events sends video & audio to an FTP site or email upon an alarm trigger or detecting motion
    • Supports various resolutions: NTSC 704x480, 352x240 PAL: 704x576, 352x288
    • RS-485 interface for remote pan/tilt control
    • Remote software upgrade via your network

  • Specifications
    Manufacturer CNB Technology
    Manufacturer Product No. IJB2000
    Video Input Signal 1-ch BNC composite
    Video Signal Select Auto Detect NTSC or PAL
    Video Output Level 1-ch Video Loop Back (BNC, 75Ω, composite
    Main Processor 32-bit Embedded CPU with Linux
    System Memory NAND Flash: 64MB, 128MB DDR
    SD Card: up to 4GB
    Compression MJPEG, MPEG4, H.264
    Frame Rate Dual Mode: MJPEG 15fps NTSC/PAL
    MPEG4, H.264 30fps NTSC, 25fps PAL
    Resolution D1 (NTSC: 704 x 480 / PAL: 704 x 576)
    CIF (NTSC : 320 x 240 / PAL: 352 x 288)
    Video Streaming MJPEG / MPEG4 (or H.264) Dual mode
    Constant and variable bit rate in MPEG4 (128kbps ~ 3M bps)
    Controllable frame rate and bandwidth
    Image Settings Compression Level Setting
    Configurable Brightness, Sharpness, White balance
    Audio Two-way Full Duplex / ADPCM G.726
    Network Protocol IPv4, HTTP, TCP, RTSP, RTP, RTCP, UDP, SMTP, FTP, ICMP, DHCP, UPnP, Bonjour, ARP, DNS, DynDNS
    Supported DDNS CNB DDNS
    Reference code with SDK
    Video Access from Browser Camera live view for up to 10 clients
    LAN Interface Ethernet 10/100 BaseT (RJ-45)
    Support PoE Standard IEEE 802.3af
    Access Level Setup Multiple user access levels with password protection
    Network Security IP Filtering
    Image Detection 3 Regions of Motion Detection
    Sensor Detection Sensor In, Scheduling, Alarm Out
    After Event Process JPEG Image Upload over FTP Server
    SMTP (email server)
    Local Storage JPEG image write to internal & SD memory
    Internal Memory: max 32MB
    SD Memory: max 4GB
    Pre / Post Alarm Detail time set: max pre-alarm 5 sec, post-alarm 8 sec
    Browser IE 6.0 or above
    Upgrades Firmware upgrade over HTTP
    Onvif Compliant Yes
    Operating Temperature 14° to 104&degF (-10° to 40°C)
    Power Requirement 12VDC, Max 6W
  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - 1-Channel Video Server
    • 1x - CD Software & Manual

Please wait...