Cable Electronics CAT5 RX Cat. 5 Distribution Receiver

Distribute high-definition component or composite video and digital or left and right audio over extended distances using inexpensive cat. 5 wire. The Cat. 5 Distribution Receiver works with the Cat. 5 Distribution Amplifier - Transmitter (sold separately), which delivers a single component video signal or three composite video signals along with digital or analog audio up to 300 feet in 1080i; if you use cat. 6 cable instead, the maximum distance is 500 feet. Each connected room will require Cat. 5 Distribution Receiver; the transmitter can support up to two rooms.

Expandable System Connects Additional Video Sources
The Cat. 5 Distribution Amplifier/Transmitter features video and audio loop output to accommodate future expansion to additional cat. 5 transmitters and receivers. Additional features include a discrete passive IR channel for the use of external IR remote control systems.

Specifications
CE Labs Product No.:	CAT5 RX
UPC:	617190002129
Dimensions:	6.85" x 3.25" x 1"
Connections:	1 component video or 3 composite video connections & digital or left/right analog audio
Power Requirement:	External 9 or 10 Volt AC @ 600 mA with a (2.1 mm center) Coaxial connector
Warranty:	1 year, limited

Video
Nominal Input Level:	1 Volt peak to peak
Gain:	1 Volt into 75 ohms (2 Volts unterminated)
Output Impedance	75 ohms
Isolation Port to Port:	> 65 dB
Isolation Out to Input:	> 80 dB
Return Loss:	> 30 dB
Video Bandwidth:	> 50 MHz (HDTV requires 37 MHz min.)
Distance:	300 feet @ 1080i (500 feet with CAT6 cable)

Audio (Analog)
Nominal Input Level:	1 Volt peak to peak
Gain:	Unity (slightly reduced at max cable length)
Input Impedance:	22k ohm
Output Impedance:	1k ohm
Frequency Response:	20 Hz to 20 KHz
Signal to Noise Ratio:	80 dB @ 1 Volts out
Digital Audio:	Supports standard SPDIF digital audio