Cable Electronics AV901HD 9-Way HD & Component Video Distribution Amplifier

Cable Electronics AV901HD 9-Way HD & Component Video Distribution Amplifier

Multi-Zone HD Distribution Without Signal Loss!
  • No signal loss
  • Unity gain
  • Daisy chain several units for larger displays with great picture quality
  • Heavy duty metal housing provides excellent shielding
  • Allows up to 150 ft. runs



List Price: $319.90

Your Savings: $123.92

REWARDS: 195 points
  • Details
  • Specs
  • Reviews
  • What's Included
  • You don't need to purchase multiple high-end A/V sources such as high-definition antennas or satellite dishes in order to enjoy them in your living room, bedroom, and kids' rooms. Thanks to the 9-Way HD & Component Video Distribution Amplifier, you'll be able to distribute HDTV and analog television signals from a single A/V source to up to 9 television receivers with no signal loss.

    This audio/video amplifier accepts HDTV video and stereo audio signals via RCA/component type cables and distributes at the exact same quality as the source to a maximum of nine HDTV receivers, or any device looking for a component video/stereo audio signal, all without any signal loss. Have more than nine outputs? Daisy-chain several of these signal amplifiers together for larger systems.

  • Specifications

    Cable-Electronics Labs Product No: AV901HD
    UPC: 617190001122
    Maximum Cable Run: 150'
    Power Requirements: 9-10V AC 1000 mA w/2.1mm coaxial connector
    Warranty: 1 year, limited


    Input/Output Type: RCA audio, video; Y/Pr/Pb; digital audio
    Gain: 2 Volt Unterminated, 1 Volt Terminated: 75 ohms + 5%
    Input Impedance: 75 ohms + 5%
    Output Impedance: 75 ohms + 5%
    Video Insertion Loss: 50 Hz to 10 MHz < .40 dB
    In to Out Isolation: 50 Hz to 10 MHz 32 dB Port to Port
    Out to In Isolation: 50 Hz to 10 MHz 60 dB
    Return Loss: 50 Hz to 10 MHz 20 dB
    Video Bandwidth: > 100 MHz
    Audio Response: > 100 MHz


    Gain: Unity
    Input Impedance: 22k ohm
    Output Impedance: 1k ohm
    THD: 0.05% at 1.0 Volts input level
    Frequency Response: 20 Hz to 100 KHz
    Channel Separation: > 75 dB @ 1 KHz
    In to Out Isolation: 60 dB
    Out to In Isolation: 60 dB
    Signal to Noise Ratio: 100 dB re 2 Volts (out)

    Digital Audio

    Supported Audio: SPDIF digital audio
    Unity Gain: When terminated into 75 ohms (2X gain high imp.)
    Bandwidth: Greater than 50 MHz to ensure minimal degradation

  • 1 Review

    Review of 8143h Review by DAVID
    Review of 8143h

    Very solid construction and works as advertised.

    Posted on 10/6/2012

    Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 9 Way Component / HD Distribution Amplifier
    • Power supply
    • Instructions

Please wait...