Aeon Labs DSB04100-ZWUS Z-Wave Door/Window Sensor

Allows Your Z-Wave Devices to Alert You When Doors, Windows, Cabinets, and Drawers Have Been Opened
  • Sends commands to up to 6 Z-Wave devices
  • Compact and discrete design
  • Bidirectional mounting allows for flexibility in installation
  • Low battery alert
  • Mounting hardware and battery included



List Price: $79.95

Your Savings: $30.00

  • Details
  • Specs
  • Reviews
  • What's Included
  • This compact, subtle sensor communicates with your Z-Wave network when the main unit is separated from the smaller unit. Perfect for maintaining security or protecting valuables, the sensor can be installed in door frames, window frames, and along drawers and cabinets. When contact is broken, commands are automatically sent to up to six devices, turning on lights, setting off sirens, or any other application you have programmed to report the sensor's state. All communications are done wirelessly over radio frequency (RF). Mount the sensor horizontally or vertically to best fit its environment. A hidden security tamper prevention trigger lets you know when the unit has been removed from the mounting plate or pried off the surface to which it was mounted. The sensor requires the use of a CR2 battery, included. With a brand-new battery, the sensor can operate for up to two years. When used with a gateway, the battery level is displayed so you'll know exactly when the battery needs to be replaced.

  • Specifications
    Manufacturer Aeon Labs
    Manufacturer Product No. DSB0410-ZWUS
    UPC 798304144772
    RF range 300 feet (outdoor)
    Power CR2 battery (included)
    Dimensions 2cm x 3.4cm x 7.9cm (main body)
    Certification FCC, CE, G-TICK, ROHS for USA, European, and Australian markets
  • 3 Reviews

    Review of 75503 Review by RAYMOND
    Review of 75503

    Works great can be used for wide range of things

    Posted on 5/5/2012

    Review of 75503 Review by MICHAEL
    Review of 75503

    Perfect - easy to sync with mi casa verde.

    Posted on 5/2/2012

    Review of 75503 Review by ROGER
    Review of 75503

    Very good product. Easy to install by mounting on door frame with 2-sided sticky tape and / or mounting screws (I used both). Fairly easy to link to my Schlage Link system. The product is such a good value, they were on back-order, and I had to wait. One small request: make the type font on the instructions a little larger to make it easier to read for this old man's eyes. :)

    Posted on 12/16/2011

    Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - Sensor unit
    • 1x - Bidirectional mounting plate
    • 1x - Magnet unit
    • 1x - Magnet unit outer shell
    • 1x - CR2 battery
    • 6x - Pieces of double-sided mounting tape
    • 4x - Screws
    • 4x - Screw anchors

Please wait...