ACT RS114W A10 Relay Rocker Switch, White

Switch Made to Handle Higher Loads
  • Compatible with all X10 transmitters, timers and software systems
  • Great for high-wattage lighting, pool equipment or any other non-dimming loads
  • Status LED allows you to see if a device is on or off
  • Capable of handling loads of 20A at 120V



List Price: $40.25

Your Savings: $2.30

  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • Looking for a way to automate high-wattage devices controlled by a switch? Simply replace the existing wall switch with this Advanced Control Technologies A10 Relay Rocker Switch. Built with a mechanical Form A relay instead of the triac found on most dimmers, this Relay Rocker Switch can handle loads of 20 amps at 120V. It's ideal for direct, or automated control of high-wattage incandescent lighting, pool equipment, air conditioners, fluorescent lights and more. These A10 Relay Rocker Switches are designed for high-power use and capable of handling loads of 20A. It requires a neutral wire connection.

    This switch will work with the commonly-used X10/PLC signals, as well as the proprietary A10 protocol. This makes them ideal for remote or timed control with any X10 transmitter, intelligent controller or X10-based home automation software. The switch responds to "All Lights On," "All Units On," "All Lights Off", and "All Units Off." They're even capable of two-way powerline communication, including the ability to report status upon a status request from an intelligent controller.

    Capable of a Virtual 3-Way Switch
    Because these switches can be controlled from another location, from another switch with the same address, they're ideal for creating a virtual 3-way switch. It's ideal for anyone that wants to control a set of lights from more than one location, without having to hire an electrician to run an additional wire between the two switches. Each switch's address can be set via easy, push-button configuring.

    Status LED
    A status LED verifies power to the unit and indicates status and power. The LED can be set to be "ON" (direct acting) or "OFF" (reverse acting) when load is off.

    Note: Because these switches respond to ALL LIGHTS ON, use care when controlling non-lamp loads. Use an X10 appliance module or wall receptacle if you don't want your device to respond to that command.

  • Specifications

    ACT Product No.: RS114W
    Maximum Switch Current: 20 Amps
    Maximum Switching Power: 2400VA
    Maximum Switching Voltage: 132VAC
    Internal Form A Relay: Enclosed, flying lead connections
    Dimensions: 4.2" x 2.44" x 1.6" (fits in 2" x 4" electrical box)
    Operating Temperature: 32°F to 120°F
    Connections: Line (black), Load (blue), Neutral (white), Ground (green)
    Color: White

  • 6 Reviews

    Review of 2270AW Review by WALTER
    Review of 2270AW

    Works great.

    Posted on 11/7/2013

    Review of 2270AW Review by PAUL
    Review of 2270AW

    Great product. Works flawlessly.

    Posted on 8/7/2013

    Review of 2270AW Review by WALTER
    Review of 2270AW

    Easy to install & set up. Performs as advertised. Very quiet operation. White & Ivory are available, but Almond is not.

    Posted on 6/27/2013

    Review of 2270AW Review by BILLY
    Review of 2270AW

    Great to have a 20AMP switch that's controllable. A10 protocol is very versatile.

    Posted on 4/17/2005

    Review of 2270AW Review by BRIAN
    Review of 2270AW

    Programming was a breeze. Worked exactly as advertised

    Posted on 12/11/2004

    Review of 2270AW Review by JAMES
    Review of 2270AW

    No problems. Works as specified.

    Posted on 9/17/2004

    Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 20-Amp A10 Rocker Switch - White RS114W

Please wait...