ACT RS114I A10 Relay Rocker Switch - Ivory

Switches Made to Handle Higher Loads
  • Compatible with all X10 transmitters, timers and software systems
  • Great for high-wattage lighting, pool equipment or any other non-dimming loads
  • Status LED allows you to see if a device is on or not
  • Ivory



List Price: $40.25

Your Savings: $4.30

  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • Looking for a way to automate high-wattage devices controlled by a switch? Simply replace the existing wall switch with these A10 Relay Rocker Switches. Built with a mechanical Form A relay instead of the triac found on most dimmers, these switches can handle loads of 20 amps at 120V. They're ideal for direct or automated control of high-wattage incandescent lighting, pool equipment, air conditioners, fluorescent lights and more. These A10 Relay Rocker Switches are designed for high-power use and capable of handling loads of 20A. Requires neutral wire connection.

    These switches work with the commonly-used X10/PLC signals, as well as the proprietary A10 protocol. This makes them ideal for remote or timed control with any X10 transmitter, intelligent controller or X10-based home automation software. Switches respond to "All Lights On," "All Units On," and "All Lights Off." They're even capable of two-way powerline communication, including the ability to report status upon a status request from an intelligent controller.

    Capable of a Virtual 3-Way Switch
    Because these switches can be controlled from another location from another switch with the same address, they're ideal for creating a virtual 3-way switch. It's ideal for anyone that wants to control a set of lights from more than one location, without having to hire an electrician to run an additional wire between the two switches. Each switch's address can be set via easy, push-button configuring.

    Status LED
    A status LED verifies power to the unit and indicates status and power. The LED can be set to be "ON" (direct acting) or "OFF" (reverse acting) when load is off.

    Note: Because these switches respond to ALL LIGHTS ON, use care when controlling non-lamp loads. Use an X10 appliance module or wall receptacle if you don't want your device to respond to that command.

  • Specifications

    ACT Product No.: RS114I
    Maximum Switch Current: 20 Amps
    Maximum Switching Power: 2400VA
    Maximum Switching Voltage: 132VAC
    Internal Form A Relay: Enclosed, flying lead connections
    Dimensions: 4.2" x 2.44" x 1.6" (fits in 2" x 4" electrical box)
    Operating Temperature: 32°F to 120°F
    Connections: Line (black), Load (blue), Neutral (white), Ground (green)
    Color: Ivory

  • 7 Reviews

    Review of 2270ai Review by RICK
    Review of 2270ai

    As advertized. Easy setup.

    Posted on 5/6/2014

    Review of 2270ai Review by JOHN
    Review of 2270ai

    Much quieter than the old-style X-10 relay switches. I like the programming options which let you customize how the unit responds to various "ALL" signals.

    Posted on 1/15/2014

    Review of 2270ai Review by KEVIN
    Review of 2270ai

    There was no information stating this switch did not work with CFL's. Other than that it works fine.

    Posted on 11/7/2013

    Review of 2270ai Review by WALTER
    Review of 2270ai

    Works great but would like to get them in Almond.

    Posted on 11/7/2013

    Review of 2270ai Review by JOHN
    Review of 2270ai

    The 20-amp A10 Rocker Switch was very easy to install and the program. Worked well controlling Holiday lighting.
    Please explain shipping options better on your web sight. Shipping tracking was poor.

    Posted on 1/4/2008

    Review of 2270ai Review by JIM
    Review of 2270ai

    works just perfectly

    Posted on 10/19/2005

    Review of 2270ai Review by ALAN
    Review of 2270ai

    This one worked as expected and is doing fine job.

    Posted on 8/7/2005

    Leave a Review

    Only registered users can write reviews. Please, log in or register

    • A10 Relay Rocker Switch - Ivory RS114I

Please wait...