5.8GHz Wireless 8-Channel AV Sender

5.8GHz Wireless 8-Channel AV Sender

Transmit a Composite Video and Audio Signal up to 300 Feet with this Wireless Transmitter and Receiver
  • Robust and durable designed for industrial/commercial indoor wireless AV application
  • Ideal for portable covert surveillance applications
  • Transmission range can be over 7 km when combine with high-gain antenna and amplifier
  • 5.8 GHz frequency avoid interference from any 900 MHz and 2.4 GHz applications
  • Low profile housing and convenient slots for permanent mounting



List Price: $317.46

Your Savings: $67.46

REWARDS: 250 points
  • Details
  • Specs
  • Reviews
  • What's Included
  • Robust and durable, designed for industrial, commercial indoor wireless audio/video application. Ideal for portable, temporary and/or covert surveillance applications. 8 user selectable channels. Strong immunity of interference from any of 900 MHz or 2.4GHz application such as Cordless phone, 802.11b/g Wireless LAN, Bluetooth, Microwave oven, etc. Low profile metal housing design with convenient slots for permanent mounting. Convenient front panel frequency selection, video gain adjustment, power switch & indicator. Capable in transmitting stereo audio. Operating voltage from 8.0 to 32 volts DC with 90%+ efficient, low noise switching voltage regulators. Transmission range up to 300 feet with clear line-of-sight. Transmission range can be over 7 km with combination of high gain antenna and RF-Link's 1 watt amplifier (APW-1000). See chart for more details.

    Q: What's the impedance for cable connect between AVS-5808 and APW-1000?
    A: Generally speaking, the cable used at 5.8 GHz frequency band has an impedance of 50 Ohm.

    Q: Can I connect a 2.4GHz wireless camera to AVS-5808 transmitter and while my AVS-5808 is connected to a DVR? Why do I get a fuzzy image when I do so?
    A: Technically speaking, the only way such combination would work is to disable the 2.4 GHz wireless module inside the camera. The issue of fuzzy image is likely to be caused by the difference in the video gain level between AVS-5808 receiver and DVR. And there is a Variable Resistor switch on the AVS-5808 receiver, which is specified as "gain". The VR switch can be used to adjust the video gain level of AVS-5808 receiver. The AVS-5808 receiver should connect to a DVR and then to a TV, if it is connected to both DVR and TV at the same time, the fuzzy image will also occur.

    Q: Why 9V power adapter is provided with AVS-5808 while "12V" is printed on the unit's power connector?
    A: The recommended input voltage of AVS-5808 is 9V DC to 28 V DC. It is why the 9 V power supply is included in the package. Consequently, it is certainly all right to use the 12 V power supply. As for the "12 V" indicated on the AVS-5808 power supply connector, it is simply because 12 VDC is the most commonly adopted input voltage in the surveillance industry, which we think is exactly AVS-5808's target customer.

    Q: Does AVS-5808 work with RF-Link's APW-1000 amplifier? And how?
    A: Yes, AVS-5808 does work with APW-1000. Simply connect AVS-5808 transmitter antenna to "RF-out" connector of APW-1000, and from APW-1000 "RF-in" connector back to AVS-5808 transmitter.

    Q: If combined AVS-5808 with APW-1000, what range of transmission can I expect?
    A: With such set up, signal can be transmitted up to 2 km.

    Q: Does AVS5808 receiver have an output other than baseband (ie 30 Hz to 6MHz)?
    A: AVS-5808 will have no problems connecting to a regular NTSC television or a monitor through its RCA jack. In addition, in order to provide the outgoing signals, all RF devices must lower the frequency from RF frequency, which is 5.8 GHz to the baseband frequency in order to be visible to users.

    Q: The specs list power from 8-32V input. Would it realistically run OK if I connected a 12V battery to a PV power jack and ran it off of that?
    A: 12V battery thru. PV power jack should work, and typical power draw is 12V.

    Q: What type of antenna does AVS-5808 equipped?
    A: AVS-5808 is equipped with Omni-Directional antenna.

    Q: Does AVS-5808 have a standard 9V power adapter jack or is it specialized?
    A: AVS-5808 is equipped with 12V power adapter.

    Q: Does AVS-5808 accommodate both NTSC and PAL version?
    A: Current offer from RF-Link is NTSC version; PAL version is also available with special request.

  • Transmitter
    Input voltage (module): DC 8V - 32V
    Current consumption: <150 mA
    Antenna type: 5 dBi omni-directional antenna
    Operating temperature: 0° C to 50° C
    Storage temperature: -20° C to 70° C
    Operating humidity: Less than 85%
    Storage humidity: Less than 90%
    Electrical Specifications
    RF Output power @connector: 50mV/[email protected]
    RF Modulation type: FM
    RF deviation (FM): 6.4 MHz peak to peak
    RF Channel frequencies: CH1: 5733MHz, CH2: 5752MHz, CH3: 5771MHz, CH4: 5790MHz, CH5: 5809MHz, CH6: 5828MHz, CH7: 5847MHz, CH8: 5866MHz
    RF Channel selection: Rotary Switch
    RF Frequency stability: 2°50KHz
    RF Output flatness: +0 ~+3dB
    Video Input level: 1Vpp
    Video Impedance: 75 ohms
    Video Pre-emphasis: NTSC or PAL
    Video D.G.: < +/-8
    Video D.P.: < +/-8
    Audio Input level: 2Vpp
    Audio Impedance: 600 ohms
    Audio Frequency response: 30Hz ~ 12KHz
    Audio carrier frequency (L): 6.0MHz +/- 25KHz
    Audio carrier frequency (R): 6.5MHz +/- 25KHz
    Audio distortion: 3% max. THD
    Audio reection:40B min

    Input voltage(module): DC 8V - 32V
    Current consumption: < 170 mA
    Antenna type: 5 dBi omni-directional antenna
    Operating temperature: 0° C ~+50° C
    Storage temperature: -20° C ~+70° C
    Operating humidity: Less than 85%
    Storage humidity: Less than 90%
    RF Input frequency range: 5725 ~ 5875MHz
    RF Input level @connector: -25 ~ -84dBm
    RF IF frequency: 479.5MHz
    RF IF bandwidth:18MHz
    RF Gain flatness: 3dB max
    RF Noise figure: 2dB Typical
    RF Input return loss: 7dB Typical
    RF LO.drift: <8°%
    RF LO.leakage: <8°%
    RF Image rejection: 40dB
    Video Output level: 1V0°.15Vp-p Load
    Video Impedance: 75 ohms
    Video De-emphasis: NTSC or PAL
    Video D.G.: < 8°%
    Video D.P.: < 8°%
    Video S/N ratio: 38dB min
    Audio Output level: 1.4Vpp
    Audio Impedance: 600 ohms
    Audio Frequency response: 30Hz ~ 12KHz

  • Leave a Review

    Only registered users can write reviews. Please, log in or register

  • 5.8GHz wireless 8-CH A/V transmitter (Qty 1)
    5.8GHz wireless 8-CH A/V receiver (Qty 1)
    User guide (Qty 1)
    Omni (5 dBi) directional antenna (Qty 2)
    Composite cable (Qty 2)
    BNC-to-RCA connector (Qty 2)
    Power adapter (Qty 2)

Please wait...