2GIG Technologies 2GIG-DW10-345 Thin Door/Window Contact

2GIG Technologies 2GIG-DW10-345 Thin Door/Window Contact

Sensor Alerts Security Panel when Door/Window is Opened
  • Wireless RF signal range up to 350 feet in open air
  • Works with Normally Closed (N/C) dry contact devices
  • Over 1 million unique ID code combinations
  • Seamlessly integrates with 2GIG Go!Control Panel*



List Price: $45.00

Your Savings: $16.76

REWARDS: 28 points
  • Details
  • Specs
  • Reviews
  • What's Included
  • The Thin Door/Window Contact Sensor from 2GIG Technologies can be installed on windows, doors, and many other objects that open and close around a home or office. The Door/Window Contact sensor transmits signals to the 2GIG Go!Control Panel (service plan available for remote monitoring) when the magnet is separated from the sensor. The sensor has an external input that accepts Normally Closed dry contact devices and the sensor is equipped with a tamper-resistant cover for additional security. The sensor and magnet should be mounted at least 4.7" above the floor to avoid damage and they should be not be mounted in an area where they will be exposed to moisture. Two included CR2032 batteries (included) power the Thin Door/Window Contact.

    *Monitoring and remote management options are available and start as low as $25/month. A 2GIG Technologies Cell Radio Module and Go!Control Panel are required to enable this functionality. No credit check or long term contract is required. Prices are determined by the level of functionality desired by the customer. Mention Smarthome when setting up to receive the Smarthome special discount. Call Vault Alarm at 888-528-2858 to get started today!

  • Specifications
    Manufacturer 2GIG Technologies
    Manufacturer Product No. 2GIG-DW10-345
    UPC 093863118319
    Sensor Dimensions L 2.59 inches x W 1.03 inches x H 0.49 inches
    Magnet Dimensions L 1.3 inches x W 0.435 inches x H 0.312 inches
    Weight (including battery & magnet) 1.1oz
    Wireless RF Signal Range 350 feet, open air, with 2GIG Go!Control Panel
    Code Outputs Alarm, alarm restore, external alarm, external restore, tamper, tamper restore, supervisory, low battery
    Transmitter Frequency 345 MHz (crystal controlled)
    Transmitter Frequency Tolerance +/- 15 KHz
    Transmitter Bandwidth 24 KHz
    Modulation Type Amplitude shift keying-On/Off keying (ASK-OOK)
    Unique ID Codes Over 1 million different code combinations
    Supervisory Interval 70 minutes
    Peak Field Strength Typical 36,000 uV/m at 3m
    External Input Sampling Current 20 uA
    External Input Accepts N/C dry contact devices
    Reed Switch Magnetic Sensitivity 10 to 20 amp turns
    Reed Sensitivity 0.625 inches minimum gap, 0.85 inches typical
    Magnet Type Rare earth
    Housing Material ABS plastic
    Color White
    Operating Temperature 32°F to 120°F
    0°C to 49°C
    Relative Humidity 5-95% non-condensing
    Battery (included) 2 Panasonic CR2032 or equivalent lithium batteries
    Regulatory Listings ETL, FCC part 15, Industry Canada
    Manufacturer Warranty 2 years
  • 1 Review

    Review of 79548 Review by MICHAEL
    Review of 79548

    Installed very easily. Instructions say the magnet should be less than 1cm from the sensor. With my doors, this isn't possible. However, it worked with a little extra distance.

    Posted on 7/12/2013

    Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - Sensor
    • 1x - Magnet
    • 2x - CR2032 Battery
    • 2x - Phillip's Flat-Head Screw
    • 1x - Two-Pin Connector w/ 12" Flying 2-Wire Lead
    • 1x - Adhesive Strip
    • 1x - Instruction Manual

Please wait...