Z-Wave Wireless Lighting Control Three-Way Dimmer Kit
Share Share Share Share Share
Rewards: 52 Points

Z-Wave Wireless Lighting Control Three-Way Dimmer Kit

Enables Wireless Control of On/Off and Dim Functions
  • Wirelessly control on/off and dim functions of incandescent lighting from two places
  • Kit includes primary dimmer switch and auxiliary switch for control of one light from two locations
  • Provides Z-Wave wireless and manual control
  • LED indicator light allows easy location of primary switch in dark room
  • Easily connects using existing wires

Item #: 5943

In stock - Ships Today

Special Price: $52.82

List Price: $79.99

Your Savings: $27.17

Frequently Bought Together:

Z-Wave Wireless Lighting Control Three-Way Dimmer Kit

Special Price: $52.82

List Price: $79.99

Your Savings: $27.17

+

GE 45609 Z-Wave Wireless Lighting Control On/Off Wall Switch

Special Price: $46.11

List Price: $59.99

Your Savings: $13.88

Price For Both: $98.93

  • Details
  • Specs
  • Reviews
  • What's Included
  • The GE 3-Way Dimmer Kit enables wireless control of on/off and dim functions of hard-wired incandescent lighting, and includes a primary and auxiliary switch for control of one light from two locations. The dimmer switches replace your current light switches, use your existing wiring, and provide Z-Wave wireless and manual control of overhead lighting. The primary dimmer switch includes an LED indicator light to easily locate the switch in a dark room.

    The auxiliary switch is not Z-Wave enabled and does not directly control electrical loads. It must be used with a compatible Z-Wave enabled, 3-wire switch in three-way installations where a light is controlled from 2 locations such as the top and bottom of a staircase. This switch communicates with the Z-Wave enabled switch, providing manual On/Off/Dim control of the connected lighting (through the Z-Wave enabled switch) and synchronization of the lighting status (On/Off/Dim level) between the two switches.

    Important Note:Not for use with fluorescent lights or motors.


  • Specifications
    Manufacturer GE
    Manufacturer Product No 476TM-524
    UPC 45613
    Power 120VAC, 60Hz
    Signal (Frequency) 908.42 MHz
    Minimum Load 400W, incandescent lamps only
    Maximum Load 500W, incandescent lamps only
    Range Up to 65 feet line of sight between the Wireless Controller and the closest Z-Wave receive module
    Operating Temperature Range 32°F - 104°F (0 - 40°C)
  • 8 Reviews

    Review of 5943 Review by DRAKE
    Review of 5943
    Rating

    Easy to install and use. Nice features.
    Negative: When remote programming of dim level is used to change level of already "on" lights, a noticeable flicker occurs

    Posted on 1/12/2014

    Review of 5943 Review by CODY
    Review of 5943
    Rating

    They go in and off fine. When using the dimming feature the lights blink and flicker. It still works. Just a little annoying

    Posted on 4/20/2013

    Review of 5943 Review by Tim
    Review of 5943
    Rating

    These switches are NOT compatible with dimmable LEDs such as the CREE or EcoSmart 6 recessed can replacements. These switches cannot hold the voltage steady with the low current draw of LED lights and will cause the lights to flicker, even at 100% brightness. If you have 4 or more LEDs on a single circuit, they may be steady depending on brands.

    GE/Jasco will not accept this as a faulty dimming mechanism and will not repair or replace the devices. With the new US energy laws restricting incandescent bulb usage, if you purchase these switches now for your home and replace your lights with LEDs or any low wattage device, you will need to purchase new dimming switches.

    Investigate the higher cost Electronic Low Voltage ELV dimmers on the market if you are going green.

    Posted on 2/24/2012

    Review of 5943 Review by MICHAEL
    Review of 5943
    Rating

    Works great. The blue led is a nice touch. You can disable this if you want. You need to be aware that the master needs a neutral line to work. This will require a little home wiring knowlege. It must need the power to transmit the Z-wave signal.

    Posted on 1/22/2012

    Review of 5943 Review by PAULO
    Review of 5943
    Rating

    Works great with the MCV Vera 2.

    Posted on 9/11/2011

    Review of 5943 Review by CYNTHIA
    Review of 5943
    Rating

    won't work with the wiring set-up in my house...spent 4 hours discovering this... very disappointed

    Posted on 6/30/2011

    Review of 5943 Review by Wes
    Review of 5943
    Rating

    I really like the GE zwave lights. I've purchased a whole set of them for my basement development. Unfortunately, they do seem to have quality control issues. I've ordered around 15 sets of dimmers and 3-ways, and I've had 2 sets of the 3-ways arrive DOA. And I've had one regular dimmer also arrive DOA. The ones that work seem to still be working, but we'll see for how long!

    Posted on 3/25/2011

    Review of 5943 Review by AARON
    Review of 5943
    Rating

    They work "as advertised". It seems to be built kind of 'cheap' though; I hope it lasts.

    Posted on 10/13/2010

    Leave a Review

    You're reviewing: Z-Wave Wireless Lighting Control Three-Way Dimmer Kit

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

    • 1x - Primary Switch
    • 1x - Auxiliary Switch
    • 1x - Installation Instructions

place your order by 3pm PT for same day shipping

Please wait...

smarthome

Item has been added to your cart
smarthome

Item has been removed from your cart