- What's Included
The EN85K Ensemble is a convertible IR Receiver and IR Repeater Kit that can be adapted to almost any installation. Whether it be surface mount, TV mount, flush mount or shelf mount, it includes all of the parts necessary for installing a single-room IR Repeater System. Once installed, it will offer IR remote control for TV, Audio/Video Receiver, Blu-ray player, Cable Box, Satellite Receiver, or just about any IR controlled A/V home entertainment device located inside a cabinet or behind close doors and walls. The kit includes an IR Receiver that simply mounted to almost any surface, attached to the front of a TV or extended from behind a TV, adapted to a low-profile shelf-top placement, inconspicuously mounted in a cabinet door with the Flush Mount Adapter for controlling IR components hidden in an equipment cabinet.
Unlike other IR Repeater Kits, the Ensemble Kit let's you decide how to mount your IR Receiver by including all he necessary hardware for various installations.
4 Applications Blocks Interference Blinking Emitters DIY Installtion Surface Mount, TV Mount, Flush Mount or Shelf Mount Safe for use with Plasma, LED and LCD TVs Confirms that signals are being sent No advanced wiring or professionals needed Typical EN85K Single Room or Equipment Cabinet Application The EN85K Universal IR Kit can control up to four IR controlled devices hidden in a cabinet or closet using the included 283D IR Emitters; you can control up to eight IR controlled devices by using Xantech Designer Dual IR Blinking Emitters (sold separately). Other Considerations Where is the IR Receiver going to be located? The IR Receiver must be 'line-of-sight' to the remote control being used to able to control the system audio video components. This location should be in a convenient spot in front of the user when seated in a typical location for watching TV or listening to music. This will in turn determine how the IR Receiver is going to be mounted. How is the IR Receiver going to be mounted? The IR Receiver can be surface mounted directly to the frame on the front of some flat panel TVs. For TVs that do not have a wide enough frame, the TV mount adapter can be used to extend the IR Receiver out from the back of the TV. If the IR Receiver is going to be mounted in a cabinet door, the flush mount adapter will mount the IR Receiver in an 11/16: hole in the cabinet door. If the IR Receiver is doing to be place on a shelf or on top of a cabinet the tabletop adapter provides an attractive low profile case for that application. Where are the AV components located? The IR Receiver , Emitters and Power Supply all wire into the Connecting Block. The Connecting Block should be in the same location as the AV components to be controlled. If the AV components are in a wall unit or cabinet in the same room and within a few feet of he IR Receiver, then once the IR Receiver has been mounted, find a convenient location that allows access to the Connecting Block for making connections and then simply connect the IR Receiver, Emitters and Power Supply. The IR Receiver has a total wire length of 6 feet 8 inches, and the emitters have a wire length of 10 feet, which is usually enough wire length to make connections in a typical cabinet or wall unit. If you need to go longer, use 3-conductor unshielded cable (sold separately) between the IR Terminal and the Connecting Block. A note about placement The IR Receiver should be located so that it is not directly facing a light source such as sunlight, lamps or video displays (CRT, LCD and Plasma). When mounted near a display it should be flush to the display and away from light reflections that may occur.
Brand Xantech Manufacturer Part Number EN85K UPC Code 042777796632 Infrared Carrier Frequency Bandwidth 30-60KHz Reception Range Up to 80 feet (depending on remote control output strength and ambient conditions) Reception Angle +/- 45° Maximum Transmission Length 1 mile using 18 gauge wire Maximum Current Output 100mA IR Receiver Dimensions 0.55” diameter (14mm) Power Requirements +12VDC, 100mA
- • Owner's Manual
• 1x - IR Electronics Moduel with 3.5mm Stereo Mini-Plug and Mini IR Sensor
• 1x - Tabletop IR Receiver Adapter
• 1x - TV IR Receiver Adapter
• 1x - Flush Mount IR Receiver Adapter
• 1x - Connecting Block
• 1x - 12VDC Power Supply
• 4x - Visible Design Emitters
• 1x - Jumper Cable
• 1x - IR Terminal Block
• 1x - IR Parallel Block