Xantech 6-Zone 8-Source Remote Preamp
Share Share Share Share Share
Rewards: 1199 Points

Xantech 6-Zone 8-Source Remote Preamp

Distribute 8 A/V Sources to 6 Different Zones in Your Home

Item #: 81303

Product is unavailable

Special Price: $1,199.97

List Price: $2,398.00

Your Savings: $1,198.03

  • Details
  • Specs
  • Reviews
  • What's Included

  • Control Up to 8 Audio or Video Components
    Each common source can be controlled with an existing or learning IR remote with the use of external Xantech IR emitters or Interface Modules. Each emitter output is individually adjustable for high or low IR level. From each zone, you'll be able to turn devices on, adjust volume, and even turn off every device at once. Additional global commands include whole-house source selection for "party mode."

    RC68+ Programming Device Required for Setup
    The RC68+ remote/programmer is required for setup. This programming device contains all necessary IR commands to set the system up and to program the universal learning devices that will operate the system, such as the Programmable Controller. The input level for each connected A/V source can be adjusted with the RC68+ remote/programmer by the installer. This prevents large volume differences when switching between sources.

    Mounting Flexibility
    The Xantech 6-Zone 8-Source Remote Pre-Amplifier can be mounted four ways: between wall studs, on top of wall studs using a separate flat panel, racked into a standard 19-inch rack using an optional rack-mount plate, or freestanding.

  • Specifications

    Xantech Product No.:ZPR68-10
    Dimensions:14" W x 2.5" D x 7 " H (356mm x 64mm x 178mm)
    Weight:4 lbs. 3 oz.
    Audio Gain (@ max VC):Unity
    Audio Input Overload:> 4 V RMS (@ max VC*)
    Audio Input Impedance:> 40 k Ohms
    Audio Output Impedance:470 Ohms
    Audio Signal to Noise:96 dB (re 2V out)
    Audio THD (VC -10 dB):0.01% at 2V input level
    Audio Frequency Response (+/-?3 dB):5 Hz to 70 kHz
    Audio Bass Control Range (@ 100 Hz):+/-12 dB (in 2 dB steps)
    Audio Treble Control Range (@ 10 kHz):+/-12 dB (in 2 dB steps)
    Video Input/Output Impedance:75 Ohms
    Video Insertion Loss:< 1.0 dB (50 Hz to 10 MHz)
    Inputs/Outputs:Gold-Plated RCA-Type Phono Jacks
    Power Requirements:14V-0-14V AC @ 2.7 A, 8V-0-8V AC @ 0.7 A
    Control (CO) & STATUS Outputs:12 V @ 10 mA, 9 V @ 90 mA (90 mA is max. current)
    Maximum Total Current Available From 12V, STATUS & CO Terminals:1.8 A

  • 2 Reviews

    Review of 81303 Review by THOMAS P
    Review of 81303

    Arrived promptly. No problems.

    Posted on 8/7/2008

    Review of 81303 Review by TIM
    Review of 81303

    I had very nice experience with Smarthome parts i had purchased a item that was in stock and it came to me on time however when we looked at the part it was not the right item. I call to see about returning the item. This went very well. i had no problems getting the RGA # and sending the part back. A very good first time experience with Smarthome.

    Posted on 6/30/2008

    Leave a Review

    You're reviewing: Xantech 6-Zone 8-Source Remote Preamp

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

  • Distribution amplifier
  • Power supply
  • Power cable
  • Connecting blocks
  • Mounting materials
  • Instructions
place your order by 3pm PT for same day shipping

Please wait...