- What's Included
The X10 PRO Inductive Dimmer Wall Switch (500W, 120VAC) is a 3-way master/single pole dimmer switch that controls incandescent loads rated between 40W and 500W. XPDI3 X10 Pro Inductive Dimmer Wall Switch Module replaces your standard wall switch for complete local and remote X10 control of lighting and fan speed and allows you to integrate your fans and low voltage incandescent fixtures into your home X10 system. It can be paired with your current switch plate or one available at any local hardware or big box store. The XPDI3 Pro Switch can be used in 3-way and 4-way applications with the addition of one or more XPSS X10 Pro Companion Switches.This switch is used in applications where control of heavier loads or inductive (magnetic) lighting and motorized fans is required.
Features Responds to ON/OFF and DIM/BRIGHT commands Rated for incandescents up to 500W No feed through connectors
This switch may be used in single pole applications, simply cap off the red traveler wire. Please consider that lamps rated below 40W may flicker or operate erratically with this switch and should not be used. A power cut off is located directly below the switch for safe and easy bulb changes.
Please Note: Due to supply availability from the manufacturer, we have listed 2 separate part numbers in the title and specifications - XPDI3 and HPD-I. We list both part numbers as the inventory on this product will vary from time to time. However, these products are identical in regards to functionality and size. Unfortunately we cannot specify which version is in stock at any given time. Thank you for your understanding.
General Brand X10 Pro Brand Product No. XPDI3 or HPD-I Usage Indoor use only Electrical Max. Inductive Load 5 Amps Incandescent Load Rating 40 Watts to 500 Watts Neutral Wire Required Yes Cewrtifications UL Listed
• Owner's Manual
- • 1x - X10 Pro Dimmer - Ivory