- What's Included
Get advance notice of potentially hazardous water leaks with a system that alerts you when leaking water is detected. The WaterBug Leak Detection System can be used with virtually any security/home automation system that accepts a dry contact closure. Use it with the EnviroAlert Systems, X10 Security System Wireless Transmitters, the JDS TimeCommander Plus or a Sensaphone. This AC-powered system has normally-open or normally-closed contacts and requires a power supply, sold separately.
The WaterBug Leak Detection System comes with one surface sensor. You can also add up to 5 additional sensors (sold separately).
Also available in a battery-powered version.
Note: The Waterbug does not work with deionized water.
Specifications Manufacturer Winland Electronics Manufacturer Product No. WB-200 Dimensions Console: 5 inches x 2.44 inches x 1.25 inches
Probe Size (Standard): 2 inches x 3 inches x 7/8 inches
Probe Size (Under Carpet Probe): 2 inches x 3 inches x .18 inches
Power Requirements 12 VDC, 24 VDC (8 - 28 VDC) @ 35 mA
12 VAC, 24 VAC (8 - 28 VAC) @ 100 mA RMS
Maximum Number of Sensors and Maximum Sensor Cable Run 1 - 2 sensors, 200 feet max
3 - 6 sensors, 100 feet max
Recommended Sensor Cable 18 to 24 GA Color/Mounting Off-white / KEY SLOT Operating Temperature Control: 32°F - 130°F (0°C - 54°C)
Probes: 32°F - 130°F (0°C - 54°C)
Sensitivity Will not alarm due to high humidity or condensation Relay Rating 1 Amp at 24 VAC, resistive / 1 Amp at 30 VDC, resistive Form °C: contacts SPDT Manufacturer Warranty 1-year limited warranty
- 1x - WaterBug Water Sensor