Water Heater Shutoff, 1.25 Inch Valve
Share Share Share Share Share
Rewards: 165 Points

Water Heater Shutoff, 1.25 Inch Valve

Stop Water Heater Leaks From Becoming a Disaster!
  • Prevent avoidable water damage to your home or belongings
  • Installs in minutes - no professional plumber is needed
  • Two output contact wires make is easy to integrate with INSTEON

Item #: 7115H3

In Stock! SHIPS TODAY!

Special Price: $165.95

List Price: $169.95

Your Savings: $4.00

Frequently Bought Together:

Water Heater Shutoff, 1.25 Inch Valve

Special Price: $165.95

List Price: $169.95

Your Savings: $4.00

+

Onsite Pro FS1NPT Water Heater FloodStop, 1 Inch Valve

Special Price: $165.95

List Price: $180.00

Your Savings: $14.05

Price For Both: $331.90

  • Details
  • Specs
  • Reviews
  • What's Included
  • Don't risk your floors, carpets and other personal belongings to costly and ruinous water damage! Prevent flood damage and avoid costly repairs with the easy-to-install Water Heater Auto-Shutoff Valve. This system not only detects leaks early, but it automatically shuts your water off in the event of a leak, alerting you with the control panel's alarm. The Floodstop monitor unit is powered by the included AC adaptor When using the AC/DC adaptor, and the 4 AA batteries will serve as a battery backup in case of a power outage. Incorporate the Flood Stop into your INSTEON or X10 network - the control unit has two output contact wires and plugs with 6" leads.



    Designed for both residential and commercial dwellings, the Water Heater Auto-Shutoff Valve uses an automatic full-port, 1.25-inch motorized ball valve to shut off the water supply whenever your water heater leaks. The non-intrusive devices can be installed in as little as 10 minutes; no professional plumbers are required.

    This kit includes everything you need to protect your property from costly water-leak damage: a valve installed on your cold water inlet, a water sensor to be placed on the floor, and the control unit, which is mounted to your wall with the included screws. The Water Heater Auto-Shutoff Valve can be installed using two adjustable wrenches in minutes, although some older homes' valves might be soldered to the pipes, which would require professional installation.

    If your water heater should begin to leak, the controller tells the water valves to close and alerts you with an 87db alarm.

    This shutoff valve is made for 1.25" valves. A water heater shutoff valve is also available for 1/2", 3/4" and 1" valves, each sold separately.

    Want the same protection on your dishwasher, toilet or refrigerator ice machine? Then check out the Floodstop 3/8 Compression Auto-Shutoff (sold separately). A washing machine shutoff kit and a icemaker/water filter valve shutoff kit are also available and sold separately.

  • Specifications

    OnSite Pro Product No.: FS1.25NPT
    UPC: 815361000213
    Dimensions: Sensor: 1.25" x 7.5" double-sided; 1.25" pipe thread fitting
    Alarm: Beeping with mute button
    Materials: Lead-Free brass
    PSI Rating: Rated 0-110 psi; Max. 250 psi
    Power: AC/DC and 4 AA batteries for backup power, or can be powered with batteries only
    Compliance: UL-listed class 2 wall adapter
    Valve: Full-Port Motorized Ball Valve
    Warranty: 1 year, limited



  • 3 Reviews

    Review of 7115h3 Review by Mike
    Review of 7115h3
    Rating

    1 1/4 Floodstop FS125NPT. What a shame, nice brass and Stainless Steel valve. Our water pressue comming from the street is 100 pounds. This motor is NOT strong enough to open this valve under pressure. On top of that the gears that drive the ball vlave from the motor are cheap Plastic once a 10 cent 1/2 round gear breaks, the valve is junk! Its only as good as it weakest link and that would be a 10 cent piece of plastic!!

    Posted on 1/19/2012

    Review of 7115h3 Review by RonTev
    Review of 7115h3
    Rating

    It was easy to install - and worked fine when I tested it. However the connector between the sensor and its cable needs some attention to be sure it is connected firmly. The ability to use a push-button to turn the water on or off manually is handy! The plastic case on the battery compartment is a bit flimsy - but that shouldn't hamper operation. Once attached to the wall - it doesn't get touched

    Posted on 1/10/2011

    Review of 7115h3 Review by MARC
    Review of 7115h3
    Rating

    Nice product

    Posted on 6/20/2007

    Leave a Review

    You're reviewing: Water Heater Shutoff, 1.25 Inch Valve

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

    • Shut-off valve
    • Water sensor
    • FloodStop control unit
    • Wall adaptor and mounting screws
Norton McAfee
place your order by 3pm PT for same day shipping

Please wait...

smarthome

Item has been added to your cart
smarthome

Item has been removed from your cart