Visonic MCT302 Power Code Wireless Door/Window Transmitter
Share Share Share Share Share
Rewards: 30 Points

Visonic MCT302 Power Code Wireless Door/Window Transmitter

Magnetic Contact Transmitter Designed to Protect Doors and Windows
  • Magnetic contact and auxiliary input for external devices
  • User-selectable operation of auxiliary input as NC or EOL (end-of-line loop with NC or NO sensors)
  • Superior transmission range
  • Smart anti-collision mechanism supports multiple simultaneous transmissions
  • Compatible with PowerMax and all Visonic PowerCode wireless panels and receivers

Item #: 73953

Expected in stock 12/23/2014

Special Price: $30.07

List Price: $49.99

Your Savings: $19.92

Frequently Bought Together:

Visonic MCT302 Power Code Wireless Door/Window Transmitter

Special Price: $30.07

List Price: $49.99

Your Savings: $19.92

+

Visonic K985MCWP 85 lb Pet Immune Digital Motion Detector

Special Price: $99.97

List Price: $109.99

Your Savings: $10.02

Price For Both: $130.04

  • Details
  • Specs
  • Reviews
  • The MCT-302 is a fully supervised PowerCode magnetic contact transmitter, designed primarily for protecting doors and windows using a built-in magnetic contact that operates in conjunction with a magnet to detect the opening and closure of a door or window. This highly reliable top-performance wireless device is easy to install and operate in a wide range of residential and commercial environments.

    An additional hard-wired, end-of-line (EOL) protected input can be used, with normally open (NO) and normally closed (NC) pushbuttons, sensors, contacts, switches and other detection devices, for a variety of security and control applications. The MCT-302T offers an additional back tamper switch for detecting removal of the device from its place to comply with the latest European EN standards requirements.

    When activated, the magnetic contact and the auxiliary input initiate an individual 24-bit PowerCode ID message, which identifies it to the target receiver as a separate transmitter. Each ID code is randomly selected from 16 million possible combinations, and is therefore unique and virtually impossible to accidentally reproduce. A smart anti-collision algorithm prevents signal jamming by simultaneous transmission from multiple devices. Periodic transmission of supervision signals is used to confirm system connectivity at all times.


    These unique top quality devices are available in several optional frequencies in compliance with European, U.S. and other international standards. Each transmitter is powered by a standard long-life lithium battery, which is constantly monitored, with automatic reporting to the receiver when the battery needs to be replaced.

  • Specifications
    Manufacturer Visonic
    Manufacturer Product No MCT302P
    Frequency (MHz) 315, 433.92, 868.95, 869.2125, 869.2625
    or according to local requirements
    Transmitter's ID Code 24-bit digital word, over 16 million combinations
    Overall Message Length 36 bits
    Alarm Inputs 2, one internal and one external
    Auxiliary Input Circuit Type N.C. / E.O.L., selected with DIP switch
    E.O.L. Resistor Required 47 kO
    Message Repetition Repetitive transmission (once every 3 minutes)
    Supervision Signaling at 60-min.
    Response to Tamper Event Tamper report every 3 minutes
    Power Source 3 V Lithium CR-2 type battery
    Battery Life Expectancy 3 years (for typical use)
    Battery Supervision Automatic transmission of battery condition data
    Operating Temperature 0°C to 49°C (32°F to 120°F)
    Dimensions 3 1/6" x 1 1/4" x 1"
    Weight 1.9 Ounces
    Standards Meets FCC Part 15, IC: RSS 210
    MPT1349 and Directive 1999/5/EC
    EN 50131-1, Grade 2, Class II.
  • Reviews 1 - 10 of 31

    Page:
    1. 1
    2. 2
    3. 3
    4. 4
    Review of 73953 Review by WILLIAM
    Review of 73953
    Rating

    Works well. For this sensor/transmitter, I used the "external Switch" option, connecting it to a N/C device. Works well.

    Posted on 4/27/2013

    Review of 73953 Review by RAUL
    Review of 73953
    Rating

    Fully met my expectations.

    Posted on 4/14/2013

    Review of 73953 Review by RAUL A
    Review of 73953
    Rating

    Fully met my expectations.

    Posted on 4/14/2013

    Review of 73953 Review by RICK
    Review of 73953
    Rating

    Very function and easy to install

    Posted on 1/10/2013

    Review of 73953 Review by GREGORY
    Review of 73953
    Rating

    This was not compatable

    Posted on 10/14/2012

    Review of 73953 Review by JEFF
    Review of 73953
    Rating

    It's a big sensor... definitely did not work for my vinyl windows. I had to buy wired sensors and hook them up to the aux connectors on this transmitter.

    Posted on 8/31/2012

    Review of 73953 Review by RICHARD
    Review of 73953
    Rating

    Good working sensor

    Posted on 6/24/2012

    Review of 73953 Review by DANN
    Review of 73953
    Rating

    Very reliable, and easy to set up.

    Posted on 6/20/2012

    Review of 73953 Review by ANDREY
    Review of 73953
    Rating

    works the way it should

    Posted on 5/22/2012

    Review of 73953 Review by JORGE
    Review of 73953
    Rating

    Excellent service!

    Posted on 4/18/2012

    Leave a Review

    You're reviewing: Visonic MCT302 Power Code Wireless Door/Window Transmitter

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

place your order by 3pm PT for same day shipping

Please wait...

smarthome

Item has been added to your cart
smarthome

Item has been removed from your cart