Special Price: $113.39
List Price: $143.92
Your Savings: $30.53
Special Price: $56.45
List Price: $79.99
Your Savings: $23.54
Price For Both: $169.84
The CL-80 is a stand-alone digital keypad for access control applications and is suitable for indoor/outdoor use with a weather-resistant IP54 rating. The keypad operates from a 12/24 V AC or DC power supply and has a built-in, high-powered relay.
With this keypad you can have up to 56 individual access codes ranging from one to eight digits. Authorized users can be given specific codes for use in different access control applications such as arming or disarming alarm systems. If three consecutive invalid codes are punched into the keypad it will automatically enter into a 30 second lock-down mode to prevent unauthorized entry.
The CL-80 Outdoor/Indoor Access Control Keypad can also be integrated with an alarm system for enhanced security. If an attempt should be made to open or remove the unit from the wall the tamper switch can then trigger the alarm system. The CL-80 also has a panic output that can activate the alarm in the event a user is under duress or in an emergency. A special code can also be assigned to an auxiliary output to be used for either arming or disarming the alarm system or to activate an alarm or any other applicable system. The keypad contains an EEPROM with which data is entered into and stored so that power failures do not affect stored data. Programming of this device can only be carried out by those who are "master code" holders for the unit.
Specifications Manufacturer Visonic Manufacturer Product No. CL-80/3-6217-0 UPC 780245621702 Code Composition 1 to 8 digits, any combination Keypad Type 12 keys, 3x4, tactile operation Operating Voltage 9-16 or 22-26 V AC/DC - selectable Current Drain 15 mA standby, 55 mA with relay and AUX output active Power Failure Immunity EEPROM retains all programmed data even during total power loss Relay Contact Ratings 10A, 28 V AC or DC Relay Control Programmable for contact closure duration of 1-98 sec, or for toggle mode Auxiliary and Panic Output Current Sinking Capability Up to 100 mA LEDs Green provides status information, red and yellow have 1k series resistors and terminals for external connections Operating Temperature -20°C to 65°C (-4°F to 149°F) Index of Protection Meets IEC529:1989 requirements for IP54 (protection against dust and sprinkled water)
Leave a Review