- What's Included
Peace of Mind
Nothing beats the peace of mind brought about from seeing firsthand that everything in your home is how it should be. A wireless IP camera gives you that feeling of comfort and allows you the ability to remotely view your home from anywhere, anytime (internet connection required) you wish. The VistaCam Wireless IP Camera is ideally used with a Vera Home Automation Controller but is capable of being used as a standalone device allowing for remote viewing through the web interface.
Monitor Your Home in HD
View from a Smart Device
With 720p high-definition, the VistaCam IP Camera allows users to view a room in their home with crystal clear resolution. It doesn’t do much good to have a camera setup if the objects viewed through it are blurred and unrecognizable and the VistaCam ensures you’ll be able to monitor a room with clarity. VistaCam works seamlessly with Vera Home Automation Controllers allowing for convenient remote viewing from an iOS or Android smart device from anywhere. Add it to an existing Vera controller in only a few quick steps using the Vera Mobile app and viewing your home at any time is just a tap away.
Activate the motion sensor on the VistaCam to enable motion activated recording. This feature conserves storage space by entering a hibernation mode until woken up by nearby movement or manually by the owner. Additionally, when used with a Vera controller scenes can be set so that a specific light is automatically activated if the camera detects motion. A built-in microphone allows users to not only view the camera feed but also hear what is going on in the cameras proximity. It also allows users to communicate with anyone in the area if needed. Equipped with an IR (infrared) LED, the VistaCam can clearly see in pitch black conditions (0 LUX) up to 16 feet away. Note—in dark conditions video will be black & white.
Accessory or Standalone Camera
Optional local recording is available by inserting a Micro-SD memory card into the Micro-SD slot. The VistaCam reaches its true potential when paired with a Vera controller but isn’t dependent upon one. It can be used as a standalone IP camera but in doing so the remote viewing option through a mobile app is lost and would need to be viewed through the online web interface. Internal Wi-Fi antenna and WPS (Wi-Fi Protected Setup) button allow for fast setup over Wi-Fi network and is also compatible with Ethernet; 802.11n/b/g wireless connectivity is supported.
Specifications Manufacturer Vera Control, Ltd Manufacturer Product No. VISTACAM-700 UPC 728028321784 Dimensions D 3.1in x W 2.8in x H 4.7in Sensor & Lens Image Sensor 1/4in CMOS Sensor Minimum Illumination 0 Lux (with IR LED) Lens Fixed Focus Aperture F1.8 Horizontal Field of View 72° Vertical Field of View 48° IR Night Vision Up to 16 feet Video Video Compression H.264 main Profile M-JPEG Video Streaming Simultaneous H.264 and M-JPEG, 3GPP Compatible Image Settings Brightness
Auto/Manual White Balance
Frame Rate Up to 30 fps Audio Built-In Microphone G.711
Network Ethernet 10/100 Base-TX, Auto-MDIX Protocols TCP/IP
Wireless IEEE 802.11b/g/n
WEP 64/128 bit
WPA Personal (TKIP)
WPA2 Personal Mixed Mode
Operating Environment Temperature 32° – 104°F (0° – 40°C) Humidity 0% - 80% RH (non-condensing) Indoor / Outdoor Indoor use only Certifications Certifications FCC
Power Input 100-240V AC, 50-60Hz Output DC V/1A
- VistaCam 720p Wireless IP Camera
- Power Supply
- Setup Guide