- What's Included
The tabletop controller is pre-programmed to operate the modules included in this kit and any other UPB-enabled device installed in your home. Plug this 8-button device in anywhere in your home for remote on/off and dimming control of your lighting and appliances. Each button of the Tabletop Controller can be linked to a specific UPB device or it can be programmed to activate or de-activate a lighting scene made up of several UPB lighting control devices.
The Computer UPB Interface Module is a plug-in module that enables computer-based configuration and control of household lighting, appliances and other devices. By plugging in this interface and connecting it to your PC via the included DB-9 cable, you'll be capable of communicating with UPB plug-in modules and/or switches to control virtually anything that can be connected to existing wiring anywhere in the home, all via your PC. The Computer UPB Interface Module receives and transmits UPB digital commands and converts these signals to a serial RS-232C interface format. With the free, downloadable software, the computer can then be used to configure and/or control UPB devices. A non-controlled power outlet is provided on the face of the module. The Computer UPB Interface Module is USB compatible when used with an RS-232-to-USB adapter (sold separately).
Replace an existing switch with the UPB Transceiver-Controller Base for ultra-reliable control of lamps, fans and other electrical devices. Best of all, once this base is installed, you can change the faceplate in seconds to control lights or appliances with a single rocker switch, a quad rocker switch or even a faceplate that controls devices with switches and buttons. Three faceplates are included with this kit; additional faceplates are sold separately. Devices to be controlled can also plug into either the dimmable lamp module or the 12-amp appliance module. These plug-in modules feature pass-through outlets, as well, for non-controlled lights or appliances.
The UPB Transceiver-Controller Base controls a load of up to 1000 watts and is capable of communicating with UPB plug-in modules, switches, and/or other UPB devices to control virtually anything that can be connected to existing wiring anywhere in the home. Regardless of your chosen faceplate, the UPB Transceiver-Controller Base offers 200 dimming steps as well as a resume dim feature for attractive lighting ambience as well as the flexibility you deserve. It is not recommended that this switch be used with non-dimmable lighting or with appliances.
UPB technology delivers exceptional reliability and noise immunity at a much lower installed cost when compared to hardwired and RF solutions, and you'll experience no interference from adjacent homes. UPB technology is not X10 compatible.
Tabletop Controller Specifications
Simply Automated Product No.: US28OTP-BK Dimensions: 4.75" x 2.25" x 2.63" (121mm x 57mm x 67mm) Weight: 9.4 oz. Buttons: 8 Power: 120V AC, 60Hz Input Current: 200mA Operating Temperature: 30
Leave a Review
- Tabletop Controller
- Tabletop controller
- Wire nuts
- Mounting hardware
- Plug-in module
- RS-232 DB-9 connection cord
- UPB Appliance Module
- UPB Lamp Module
- Quad rocker faceplate
- Single rocker + 4-button faceplate
- Single rocker faceplate
Copyright 1995-2015 SMARTHOME®
Item has been removed from your cart