Smarthome Video Transcript
Title: How to Link to a SwitchLinc Dimmer
Duration: 1min 22sec
Relevant Product(s): SwitchLinc Dimmer , LampLinc
Click here to view the video.
In this video, you're going to learn how to link the INSTEON SwitchLinc to control the INSTEON LampLinc. Let's get started.
Currently the SwitchLinc controls the overhead lighting.
Hold the Paddle on the ON position for 10 seconds until the top light and the LED Bar begins blinking slowly, light this. The controlled light will flash briefly.
10 seconds is a pretty long time so be patient and hold on!
Over here, this LampLinc controls that table lamp. Press and hold the SET button on the side of the LampLinc for 3 seconds and then release. The Status LED on the LampLinc will blink and the lamp that it controls will flash to confirm the link.
Now test that the INSTEON devices are working as expected by turning the SwitchLinc ON and OFF.
And that is how you link a SwitchLinc to control a LampLinc. These directions and more can be found on our manual or online at www.smarthome.com