Thermostat Adapter - INSTEON and Totaline / Venstar Compatible
Share Share Share Share Share
Rewards: 99 Points

Thermostat Adapter - INSTEON 2441V and Totaline / Venstar Compatible

Control Your Thermostat From Any INSTEON-Compatible Controller
  • Save energy and money on bills by remotely controlling your thermostat
  • Compatible with Totaline/Venstar T1700, T1800, and T1900 thermostats
  • No batteries! INSTEON Adapter is powered by thermostat
  • Now available as an all-in-one solution: INSTEON Thermostat

Item #: 2441V


Frequently Bought Together:

Price For Both: $149.98

  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • Control the temperature from anywhere in the house! INSTEON Thermostat Adapter allows you to recall stored set point/mode settings from any INSTEON-compatible controller. Faster than grabbing a blanket, you can use your coffee table INSTEON Mini Remote to recall "comfort mode," bringing the room that perfect temperature. When turning off your lights for the night from your bedside KeypadLinc you can also save some energy and money by recalling "energy-savings mode" which minimizes the activity of your HVAC system while you're sleeping. Because you can program any button on an INSTEON controller to any temperature and mode on the thermostat, the possibilities are endless.

    Compatible Thermostat Required:
    INSTEON Thermostat Adapter is compatible with the following Totaline / Venstar thermostats:
    • T1700 (1-Day Programmable Thermostat) Thermostat.
    • T1800 (7-Day Programmable Thermostat) Thermostat.
    • T1900 (7-Day Programmable Thermostat, Dual Fuel).
    • These thermostats require power to function. If you do not have a "common" wire running to your thermostat from your heating/cooling equipment, you may need either to run a new wire or to install a thermostat power supply module.

      Rev. 2 New Features (as of 11/20/09)
    • Reports changes in temp, temp setpoints, mode, and fan mode
    • Controller functionality on heat call, cool call, and fan call (auto & manual ON)
    • Supports +1, -1 degree on incremental bright/dim commands
    • Off Button functionality - If you want a link to respond to an Off command instead of an On command, send an Off command from the INSTEON controller within 30 seconds of linking and before any other INSTEON commands are sent.

      Note: INSTEON Thermostat Adapter is an RF-only INSTEON product, which is not X10 compatible. At least one Access Point is required to communicate with your plug-in or wire-in INSTEON-compatible devices.

    Easy To Install
    Once you've installed your thermostat, INSTEON Thermostat Adapter snaps right into the jack on the bottom of your thermostat. Now all you need to do is set the thermostat to the mode/temperature you want and link it to the INSTEON controller of your choice, using INSTEON's simple Plug-n-Tap setup. Every time you activate that scene on the controller, your thermostat will return to the corresponding temperature. From plugging in your INSTEON Thermostat Adapter to changing the temperature from an INSTEON controller, setup takes as little as a couple of minutes.

    INSTEON Thermostat Adapter - Totaline / Venstar Compatible is compatible with HCA Standard and HCA Plus, home automation software allowing this adapter to be integrated into your home automation control system.

    Non-Volatile Memory
    All Thermostast Adapter settings are stored in non-volatile memory and are not lost during power failures.

    Certifications and Warranty
    All INSTEON products are safety approved. The factory for SmartLabs Design Products is ISO9001 certified. Because of this passion for quality, Smarthome stands behind the entire line of Smarthome-Brand INSTEON products with a full 2-year warranty.

  • Specifications

    Brand: Smarthome
    Manufacturer Product No.: 2441V INSTEON Thermostat Adapter for Venstar/ Totaline
    UPC: 718122387212
    Patent No.: U.S. Patent No. 7,345,998, International patents pending
    Color: White
    Range: 150' (line of sight)
    Frequency: 915 MHz
    Warranty: 2 years, limited
    Compatible Thermostats
    Carrier/Totaline Residential: P374-1700, P374-1800, P374-1900
    Venstar Residential: T1700, T1800, T1900
    Carrier/Totaline Commercial: P374-2700, P374-2800, P374-2900
    Venstar Commercial: T2700, T2800, T2900
    Status LED: 1 Green LED (normally on)
    Setup Memory: Non-volatile EEPROM
    Software Supported features (as avail via software such as HouseLinc)
    Heat set point: Supports all set points of Thermostat
    Cool set point: Supports all set points of Thermostat
    Temperature Status Request: Supported
    Humidity Status Request: Supported
    Mode Status Request: Supported
    Fan Status Request: Supported when in "Auto" mode
    Mode Control: Heat, Cool, Auto, OFF
    Fan Control: On, Auto
    Degree Format (F/C): As Supported by Thermostat
    INSTEON Features
    INSTEON Addresses: 1 hard-coded out of 16,777,216 possible
    INSTEON Links: 417
    INSTEON Messages Repeated: Yes
    Operating Temperature Range: Indoors, 32 to 104°F
    Operating Humidity Range: 0% - 85% relative humidity
    Dimensions: 1.75" H x 2.89" W x .58" D
    Weight: .80 oz
    Connector: RJ11 4 wire (top of unit)
    Input Power: 5VDC 30mA Standby (Powered from Thermostat)
    FCC Certification: ID SBP2441
    Industry Canada Certification: IC :5202A-2441V
    X10 Features
    X10 Support: N/A

  • Reviews 1 - 10 of 45

    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    Review of 2441V Review by ERIC
    Review of 2441V

    This unit was a replacement for a venstar with built in insteon card that occasionally stopped communicating. One month no issues.

    Posted on 12/11/2013

    Review of 2441V Review by Paul
    Review of 2441V

    This one is a fail, have bought 2 in four years, both of them stopped working correctly within a year

    Posted on 11/26/2013

    Review of 2441V Review by D.
    Review of 2441V

    The Adapter works fine, but the setup was not easy.
    Called several times for tech support and each time took over 20 minutes to connect to a tech. Once connected to a tech the support was great.

    Posted on 8/25/2013

    Review of 2441V Review by DWIGHT
    Review of 2441V

    I have had very poor service out of this product. Not reliable.

    Posted on 12/1/2012

    Review of 2441V Review by VICTOR
    Review of 2441V

    I love most of my Insteon products, but not this one. I am on my 4th thermostat adapter. 2 before the recall and 2 after and I almost just had a tech sending out my 5th but fortunately our call was disconnected and when I called back in I received a much more thorough tech who did research and found that the Insteon IPhone app is broken for everyone until ios6 came out (which incidentally didn't fix it either, but I'm able to use the web interface after a full reset of the adapter)

    I am convinced this adapter has been an an ill-conceived nightmare for Insteon since they've now come out with their own thermostat and wireless add-on sensor. But for customers like me who have already invested $350-$400 for the Venstar T1900, the Insteon adapter, the wiress temperature sensor, and the wireless receiver for the thermostat -we simply can't afford to buy these new pieces and scrap our investment.

    I really feel Insteon should offer the new items to people who have had as much trouble as I've had and been patient through 2 years of trials and tribulations.

    Posted on 9/26/2012

    Review of 2441V Review by KEVIN
    Review of 2441V

    This was a replacement of one that stopped working from time to time. The problem appears to be resolved.

    Posted on 7/7/2012

    Review of 2441V Review by ROSS
    Review of 2441V

    I've had two of these adaptrers for two years now and they have worked flawlessly until about a month ago. First one died. The the replacment I received from Smarthome started setting my thermostat to 78 degrees every night at 7:45 even though it was not in program mode. I was able to fix this adapter by follwing the instructions to reset it but still it was a pain to disgnose and then fix. I understand you can now buy the Venstar thermostats with integrated adapters. Maybe this is the way to go. These thermostats are great BTW.

    Posted on 7/3/2012

    Review of 2441V Review by JORGE
    Review of 2441V

    Great customer support after purchase. These units had old software and they replaced them with new ones almost a year after purchase.

    Posted on 4/13/2012

    Review of 2441V Review by CHAD
    Review of 2441V

    Had the previous version that caused malfunction issues. The new version, which was replaced under warranty, works great. I would recommend the integrated venstar/insteon tstat to the seperate units.

    Posted on 3/17/2012

    Review of 2441V Review by jxs
    Review of 2441V

    I have this modules on 2 thermostats in my house and I continue to have communication problems even after installing the Lamplinc control module on a diferent room and the relay modules.
    Smarthome has not been able to help me other than asking me to purchase more equipment from them.
    The concept is great as long as it would work....

    Posted on 1/21/2012

    Leave a Review

    You're reviewing: Thermostat Adapter - INSTEON 2441V and Totaline / Venstar Compatible

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

    • INSTEON Thermostat Adapter
    • Quick-Start Guide
place your order by 3pm PT for same day shipping

Please wait...


Item has been added to your cart

Item has been removed from your cart