SwitchLinc Relay PLC Ivory
Share Share Share Share Share
Rewards: 39 Points

SwitchLinc Relay PLC Ivory

The Quietest Relay Wall Switch You'll Find!

Item #: 23885I

Product is unavailable

  • Details
  • Specs
  • Reviews
  • What's Included

  • Built with a Quieter Relay
    Because the SwitchLinc Relay is built with a much quieter relay, it has a click that's more than 80% quieter than traditional relay switches. This allows you to remotely control lights or other non-dimmable devices without waking up the baby, annoying other family members, or sending your cat fleeing across the room. The click of the internal relay is barely noticeable, and not much louder than the click of the front paddle.

    Generates Less Heat
    Unlike the triac-based switches, SwitchLinc Relay uses a hard-contact relay to control the load. The other switches use a semiconductor (called a triac) that absorbs about two volts of power and dissipated the heat it through the front of the switch. By using a relay, the switch runs cooler and full voltage gets to the load.

    True Rocker Action & Beautiful, High Quality Construction
    Unlike other X10-compatible switches, the SwitchLinc Relay offers the natural feel of high-end switches: tap the top to turn lights on, tap the bottom to turn lights off. Other X10 switches only respond to pressing the bottom. You'll also love the crisp, tactile response with each touch, instead of the mushy feeling of other brands. The SwitchLinc is designed and manufactured to high-end specifications and goes through over 10 quality control tests. You'll thank yourself for choosing this premium quality product.

    Fully X10 Compatible
    SwitchLincs can be controlled from any X10 transmitter. Unlike some switches, SwitchLinc responds to all the standard X10 commands.

    Night / Status Light
    A small, subtle green LED at the top of SwitchLinc makes it easy to find in a dark room. The LED blinks in response to X10 signals making installation and troubleshooting simple.

    Easy to Install and Set Up
    SwitchLinc wires in like a standard wall switch, with an additional connection to a neutral wire. To set the X10 address, press and hold the set-button for 5 seconds then send it the X10 address from any X10 compatible transmitter.

    3- & 4-Way Ready
    Simply add a SwitchLinc Multi-way Companion to build a 3-way circuit, add two of them to build a 4-way circuit, add three for 5-way, etc. The multi-way companions simply connect to the yellow wire on SwitchLinc.

    15 Amp Capacity
    Maximum load is 15-amps for resistive loads, 480-watts for incandescent and inductive loads.

    Power Failure Features
    All SwitchLinc settings are stored in static memory and are not lost during power failures. Additionally SwitchLinc will return to its last brightness level upon a power restore.

    2-Year Warranty
    Smarthome stands behind the entire SwitchLinc line of products with a full 2-year warranty. Increase your warranty from 2 years to 7 for a nominal fee. Check the box above.

    Safety Tested and Factory Certification

    All SwitchLinc products are safety approved. The assembly line for Smarthome Design Products is ISO9002 certified. In order to meet the ISO 9002 standards, the entire factory underwent rigorous inspections of procedures and policies before being thoroughly audited. The certification received was based on its dedication to high quality management systems and strict adherence of quality systems and guidelines.

    No Neutral Wires Available in your House?
    Try SwitchLinc RX Dimmers

    Need a Trim Plate?
    Be sure to order a trim plate for each SwitchLinc dimmer switch.

  • Specifications

    Smarthome Design Product No.:23885i
    Voltage & Frequency:120VAC, 60Hz
    Dimensions:1.73"w x 4.14"h x 1.73"d (front bracket)
    1.74"w x 2.71"h x 1.40"d(main body)
    Maximum Load:15 amps for resistive loads,
    480 watts for incandescent & inductive loads
    Minimum Load:No minimum load required
    Circuit Types:Single pole / 3, 4 and 5-way ready
    Operating Temperature:40°F to 104°F
    Neutral Connection:Required
    Controllable Device Types:Incandescent, fluorescent and inductive loads
    Warranty:2 years (7-year warranty available for purchase)

  • 4 Reviews

    Review of 23885i Review by ERIC
    Review of 23885i

    It is more suspect to line noise than x10 or leviton switches.

    Posted on 11/29/2007

    Review of 23885i Review by WILLIAM
    Review of 23885i

    This unit has much lower sensitivity to X10 signals than most other X10 units. It fails to work in exactly the same location as Leviton or X10 brand units.

    Posted on 11/28/2007

    Review of 23885i Review by MICHAEL
    Review of 23885i

    The installation instructions worked as described. Units work well.

    Posted on 10/13/2007

    Review of 23885i Review by DAVE
    Review of 23885i

    Easy to install but having trouble getting positive triggering as the devices are so much more sensitive to line noise than earlier x-10 devices such as the 2040 I bought. It is unfortunate that to achieve functionality...I have to spend another $100.00 for a X-10 Signal Booster to get the 23885I's to work right.

    Posted on 10/1/2007

    Leave a Review

    You're reviewing: SwitchLinc Relay PLC Ivory

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

  • SwitchLinc PLC Relay, Ivory
  • Owner's Manual
  • 2 mounting screws
  • 5 wire nuts
place your order by 3pm PT for same day shipping

Please wait...