Special Price: $54.99
List Price: $64.99
Your Savings: $10.00
Price For Both: $129.98
- What's Included
Have more wattage than usual?
This High-Wattage Dimmer is for you and installs like the traditional Dimmer Wall Switch with the exception of requiring a connection to a neutral. Once installed, setup is quick and easy using simple programming.
This is no ordinary wall switch. Insteon Wall Switches can be remotely controlled from almost any device in your home: Sensors monitoring doors, windows, leaks and more, remotes, keypads and other wall switches throughout your home, even your smartphone when used with the Insteon Hub.
On/Off or Dimming
For larger loads, you need the gentle dimming grace of 1,000W of our High Wattage Dimmer Switch or the raw switching power of our 1,800W-relay-based On/Off Switch, there's an Insteon Wall Switch to fit your switching needs.
One of the most powerful features of Insteon switches, Scenes let you control multiple devices simultaneously with a single tap. Brighten all of the lights in an entire room with a tap-and-hold or create infinite virtual multi-way switches.
Ramp Rate & On Level
With a custom Ramp Rate, you get to set how quickly (or slowly) your lights brighten and dim - anywhere from instantly to 8 minutes. With On Level, you also get to specify how bright your lights are when you tap the paddle, from 1% to 100%.
Control on Apple Watch
With the Insteon App on Apple Watch, control of your Insteon Wall Switch is never out of reach. Pick from one of four presets for Dimmer Switches.
Cases for your Switches
You've got this fancy new remote-controllable Wall Switch, so why blemish it with that old chipped and discolored wall plate? Insteon Wall Plates add that extra bit of frame and polish. Oh - and they are screwless, so all you see is your fantastic new switch.
1-Gang Wall Plate
2-Gang Wall Plate
3-Gang Wall Plate
4-Gang Wall Plate
Match your décor with our seven custom switch colors. Switches can be ordered in White, Ivory, Light Almond, Almond, Brown, Black or Grey. For a truly custom look, you can change out the switch frame, paddle and wall plate for a total of 343 unique combinations.
Your Insteon Wall Switch comes with 9 white LEDs that give you at-a-glance brightness. You can change the status and brightness LED light pipe for custom color indication - white, red, green, blue or amber.
Ivory White Almond Red Green Blue Amber
General Brand: Insteon Manufacturer Product No.: 2477DHAL UPC: 813922011012
Patent No.: U.S. Patent No. 7,345,998, International patents pending Operation On-Levels: 32 locally, increments of 1% with software Ramp Rates (full-ON to full-OFF): 0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely LED Indicator: 9 White LEDs, Optional Green, Blue, Amber, or Red with #2400L kit Operation Modes: Insteon Multi-Way Circuit Support: One SwitchLinc Dimmer controls load, Cross-Link any number of SwitchLinc Dimmers or other Insteon Controllers Setup Memory: Non-volatile EEPROM Insteon Features Insteon Addresses: 1 hard-coded out of 16,777,216 possible Insteon Links: 417 Insteon Powerline Frequency: 131.65 KHz Insteon Minimum Transmit Level: 3.2 Vpp into 5 Ohms Insteon Minimum Receive Level: 10 mV Insteon Messages Repeated: Yes Radio Frequency: 915 MHz Ramp Rates (full-ON to full-OFF): 0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely via software Mechanical Paddle Type: True rocker action Color: White installed; Optional Ivory, Black, Brown, Almond, or Gray with #2400xx kits Wire Nuts: 4 included Mounting: Mounts in single or multiple-ganged junction box. Control 200 W less load for each immediately adjacent SwitchLinc Dimmer installed. For example, 1000 W load control becomes 600 W with another dimmer to the immediate right or left. Use a triple-gang box with a mechanical switch in the center to avoid de-rating. Operating Conditions: Indoors, 32 to 104° F, up to 85% relative humidity Dimensions: 4.1" H x 1.8" W x 1.2" D Weight: 3.8 oz Electrical Supply Voltage: 100-277 Volts AC +/- 10%, 50/60 Hertz, single phase Neutral Wire: Required Power Wire Leads: 6", 16 AWG, stranded, 600V, 105°C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white) Maximum Amps: 8 amps Ground Lead: 6", 18 AWG, stranded, bare copper Load Types: Wired-in incandescent lighting devices Maximum Load: 1000 Watts Power Consumption: 0.56 Watts Certification: Safety tested for use in USA and Canada (ETL #3017581)
Leave a Review
• Owner's Manual
• 1x - High Wattage Dimmer, Almond
• 1x - Quick Start Guide
• 2x - Mounting screws
• 4x - Wire nuts