Solar Sun Rings SSRA Solar Pool Heater with Water Anchor, Palm Tree Design
Share Share Share Share Share
Rewards: 54 Points

Solar Sun Rings SSRA Solar Pool Heater with Water Anchor, Palm Tree Design

Warm Your Pool Water Without a Pool Heater, Heat Pump or Even Electricity
  • Increases both surface water and deep water temperatures
  • Acts as an insulating blanket, to retain pool water warmth overnight
  • Easy break apart prevents entrapment in accidental falls
  • Reduces evaporation of water and chemicals
  • Inflatable Solar Sun Rings are 60 inches in diameter

Item #: 37883

In stock - Ships Today

Special Price: $27.15

List Price: $34.60

Your Savings: $7.45

Frequently Bought Together:

Solar Sun Rings SSRA Solar Pool Heater with Water Anchor, Palm Tree Design

Special Price: $27.15

List Price: $34.60

Your Savings: $7.45

+

Solar Sun Rings SSC Solar Spa Cover with Sun Design

Special Price: $74.92

List Price: $80.80

Your Savings: $5.88

Price For Both: $102.07

  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • The Solar Sun Ring™ is a passive solar swimming pool heating device made from two sheets of heavyweight UV resistant vinyl. The upper clear layer holds insulating air and focuses sunlight on the blue colored lower layer. The blue layer absorbs about 50% of the sunlight and converts it to heat. The balance of the sunlight is allowed to pass through for deep water heating. At night the contained air acts as an insulating blanket to retain heat gained during daylight. This model includes a water anchor which is a self filling channel below the outer ring which gives the sun ring increased weight and stability in high wind areas. The channel empties when the ring is pulled from the water.

    Solar Sun Rings are equipped with six magnets to improve clarity and decrease hardness of the water in your pool. The magnets are positioned to facilitate rafting. The strength of the magnets will permit single position removal but will easily separate to prevent entrapment in accidental falls. Solar Sun Rings were designed to be compatible with automatic pool cleaners. In the event the suction hose catches on a ring, the ring will separate from the raft to allow the pool cleaner to continue. Neither water nor pool chemicals can evaporate through the Solar Sun Rings two layers of heavyweight vinyl. You will save water and chemicals about equal to the percentage of the surface covered. Once the water in your pool has reached adequate temperature, Solar Sun Rings may be turned over to conserve water by limiting evaporation without significantly heating the water.

    • Solar heating of pool water during the day
    • Thermal blanket effect to retain heat in water at night
    • Includes water anchor for increased weight and stability
    • Reduces evaporation of water and chemicals
    • Encapsulated magnets hold rings together for rafting effect
    • Easy break apart prevents entrapment in accidental falls
    • Redesigned inner grid with added drainage grommets which allows water to seep through
    • Redesigned and enlarged outer ring for better floating, rafting and rigidity
    • Added grommet on the hanging hoop for increased durability
    • Compatible with automatic pool cleaners
    • Easy to install and remove by one person
    • Unaffected by salt or chlorine systems
    • Recommended by pool professionals
    • Easy to clean


    How many Solar Sun Rings does my pool need? We recommend enough Solar Sun Rings be purchased to cover 70% to 80% of your pools surface, ignoring the small triangles between the rings.

    How much heat does one Solar Sun Ring put out? In an ongoing test at the National Pool Industry Research Center in California Polytechnic University, San Luis Obispo and during the summer months of 2005, Solar Sun Rings proves a total heat input to test pools of 21,000 BTU (or 84,000 Heat Joules) per day for each unit. This result was validated by repeatedly heating 10 x 19 foot test pools to a maximum of 8 degrees Fahrenheit in 4 days and reached plateau after that. Approximately 67% of the pool was covered with Solar Sun Rings.

    Are Solar Sun Rings compatible with my pool? Solar Sun Rings may be used on all chlorine or salt water system pools, whether in ground or above ground. Common accessories such as pool cleaners and leaf catchers are able to operate normally with Solar Sun Rings on the pool. The many features that give Solar Sun Rings greater safety at the same time allow them to be used with automatic pool cleaners. Solar Sun Rings are also compatible with solar panel systems giving a pool a double shot of the sun's energy during the day and great nighttime insulation.

    What if a person or animal falls onto one or many Solar Sun Rings while in the pool? Because of their relatively small size and the easy detachment of the rafting magnets, Solar Sun Rings pose little or no harm of entrapment against a object, person, or animal in case of falling in. In any such case, the fallen person or animal can easily remove the Solar Sun Ring(s) and swim to safety. No other floating solar cover matches Solar Sun Rings design for safety. Countless pets and many people have died because of entrapment with the one piece bubble pack covers. The primary design criteria of the Solar Sun Ring was to prevent entrapment.

    How do I clean my Solar Sun Rings? After removal from the swimming pool Solar Sun Rings can be easily cleaned with a sponge and white vinegar solution.

    What is a Water Anchor? Solar Sun Rings recently introduced a new model to the United States, the Australian (water anchor) Solar Sun Rings, which are designed for high wind areas. The water anchor is an additional segmented overlapping channel of vinyl below the outer ring. This channel is self filling when the Solar Sun Ring is placed on the pool. It is also self emptying when manually removed from the pool. However, in strong winds the horizontal lifting closes the overlapping segments retaining the water for weight and stability.

  • Specifications
    Manufacturer Solar Sun Rings Inc.
    Manufacturer Product No SSRA
    UPC 894267002026
    Design Palm Tree Design
    Overall Diameter 61 Inches
    Heat Input Approximately 21,000 BTU
    Compatible with Pool Cleaners Yes
    Manufacturer Warranty Two Year Limited Warranty


  • 2 Reviews

    Review of 37883 Review by CHARLES
    Review of 37883
    Rating

    What a waste of money. Purchased six lost several degrees of heat. Was told I needed one more purchased two more and really covered the small pool. Still so much colder went back to solar cover. A complete waste of about $250.00 The water anchor works great though.

    Posted on 6/8/2013

    Review of 37883 Review by CHARLES J
    Review of 37883
    Rating

    What a waste of money. Purchased six lost several degrees of heat. Was told I needed one more purchased two more and really covered the small pool. Still so much colder went back to solar cover. A complete waste of about $250.00 The water anchor works great though.

    Posted on 6/8/2013

    Leave a Review

    You're reviewing: Solar Sun Rings SSRA Solar Pool Heater with Water Anchor, Palm Tree Design

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

    • 1x - 60-Inch Solar Sun Ring with Palm Tree Design
    • 1x - Attachable Water Anchor
place your order by 3pm PT for same day shipping

Please wait...

smarthome

Item has been added to your cart
smarthome

Item has been removed from your cart