Smarthome SELECT Screw-in Motion Sensing Light Adapter
Share Share Share Share Share
Rewards: 19 Points

Smarthome SELECT Screw-in Motion Sensing Light Adapter

This Hands-Free Module Will Have Lights Turn On Automatically When You Enter A Room
  • Adjustable sensitivity dials to customize your own setup
  • Five second to 100 second "on-time" duration
  • OK for use with up to a 60W light bulb
  • 360° sensing view with up to a five meter range
  • No complicated wiring or switches to install


REWARDS:19 points
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • Stop fumbling around for a light switch in the dark or while you have something in your hands, by using the Smarthome SELECT Screw-in Motion Sensing Light Adapter you can have light bulbs turn on automatically when you enter a room and off automatically after you leave. It doesn't get any easier than this; there is no wiring or advanced installation required. Simply turn the existing light switch off, remove the light bulb it controls, screw in the adapter to the empty socket, screw the light bulb back into the adapter and turn the switch back to on. Now you can carry those dirty clothes into the laundry room, walk into the garage, enter a walk-in closet, go to the basement or climb up into the attic and never get stuck looking for a light switch. The Passive Infrared (PIR) motion sensor detects movement with a 360° field of vision up to five meters. There are three adjustable dials that let you customize the settings of your adapter. This automatic switch will not only make your life more convenient, but because it turns of automatically, it conserves energy as well.

    Note: Maximum power for an incandescent bulb is 60W, for an energy saving bulb it is 20W.

    Smarthome SELECT Screw-in Motion Sensing Light Adapter Adjustable Dial Settings

    •  LITE: adjusts when the adapter will turn a light on according to lighting intensity. The moon symbol represents weak lighting intensity and the sun symbol represents strong lighting intensity. Turn the dial clockwise for the adapter to work in a strong lighting intensity and counterclockwise for weak lighting intensity.
    •  TIME: adjusts the on time for the light when the adapter is triggered. The "-" symbol represent the minimum amount of time (5 seconds) and the "+" symbol represents the maximum amount of time (100 seconds). Turn the dial clockwise to increase on time and counterclockwise to decrease on time.
    •  SENSOR: adjust the detection range for the PIR motion sensor, maximum area is approximately five meters in a 360 degree fashion from the adapter. The "-" symbol represents the minimum detection range and the "+" symbol represents the maximum detection range. Turn the dial clockwise to increase detection range and counterclockwise to decrease detection range

    Please Note: Once the adapter has been installed properly and power has been applied, the initial warm up may cause the adapter to turn the light on and off several times within the first 60 seconds. Once the Smarthome Screw-in Motion Sensing Light Adapter has warmed up, it will take a bit of effort to fine tune each of the dials to your desired settings.
  • Specifications

    Manufacturer: Smarthome
    Brand SELECT
    Manufacturer Product No.: 25124
    UPC 718122392315
    Dimensions: 5" Tall x 2 3/8" Wide
    Range: 360° field of view, adjustable up to 5 meters in all directions (approx.)
    Capability: Up to 60W incandescent bulb, 20W energy saving bulb
    On Time: Adjustable from 15 seconds to 120 seconds
    Range: Min: 1 meter
    Max: 5 meters
    Outdoor Rated: No, Indoor use only - avoid contact with sunlight, rain, and moisture
    Certifications: CE
  • Leave a Review

    Only registered users can write reviews. Please, log in or register

  • •  Owner's Manual
  • •  1x - Screw-in Motion Sensing Light Adapter
place your order by 3pm PT for same day shipping

Please wait...