- What's Included
Smartenit's 1019C ZigBee Wireless Motion Sensor helps you monitor your home with automatic motion detection lighting control and real-time temperature updates. The sensor can be interconnected with other ZigBee On/Off devices like a light switch, appliance module, or anything with the On/Off server cluster, and can be set to turn that device on whenever motion is sensed. This sensor communicates with your main ZigBee Harmony controller/coordinator (sold separately) to activate specific light, motion, and temperature conditions set-up through the iSmartenit application (Available for FREE, see links below) which is seen on your web-enabled device. The built-in ambient light sensor is only used to determine if an "On" command is sent to a linked device based on the ambient light threshold set up through the iSmartenit application. The ambient light detector is ideal for situations where the sensor is bound to a light switch and it doesn't need to turn on the light because the ambient light is bright enough, but it'll send the alarm state via the IAS Zone Cluster-which is when it is used as a security sensor.
The wireless communication between the motion sensor and your web-enabled device over a ZigBee mesh network will give you real-time information about the status of the sensor and interconnected devices. From the real-time information updates, you will be able to see which devices are active, and have the ability to control or change the programming from wherever you are using the web-enabled device.
iSmartenit Application Download Links
Specifications Manufacturer Smartenit Manufacturer Product No. 1019C UPC 680569162304 Dimensions 3.15 inches (L) x 2.4 inches (W) x 1.4 inches (H) Weight 0.13 pounds (2.1 ounces) Operating Voltage Two CR123A batteries (3V) or 12VDC power supply Communication Range Up to 165 feet indoors Detection Coverage Radius: 19.5 feet
Sensing Angle: 130°
Temperature 14°F - 122° (-10°C - 50°C) Humidity 95% RH Mounting Swivel bracket screw mounted to wall. Recommended height 98 inches ZigBee function ZigBee Pro End device ZigBee Type IAS Zone
Manufacturer Warranty 1-year limited warranty
- Review of 32478 Review by Jim
Review of 32478
Looking for current unit which allows timer setting e.g. can set on and off times based upon dawn time and sunset time. The prior name of the unit is Activehome Pro CM15A.
Posted on 5/12/2014
Leave a Review
- 1x - ZigBee HA Wireless Motion, Light, and Temperature Sensor
- 2x - 3V CR123A Batteries
- 1x - Mounting Bracket
- 1x - Power Adapter