Smart Circuit 31298 20 Network Energy Meter and Controller
Share Share Share Share Share
Rewards: 159 Points

Smart Circuit 31298 20 Network Energy Meter and Controller

Be the first to review this product

Take Control of Electrical Consumption and Costs, with the Smart Circuit Energy Management System

Item #: 9057SC

Product is unavailable

$159.64
  • Details
  • Specs
  • Reviews
  • What's Included
  • Installation
    Smart Circuit's are installed similarly to 'circuit breakers', but don't involve the safety aspect. In other words, our Smart Circuit controllers will typically be installed in a panel enclosure box, similar to the enclosure that houses circuit breakers. Alternatively, it can be installed in a double gang box and wired to an existing outlet to control specific loads, such as a window air conditioner.

    Energy Saving
    Smart Circuit 20 provides active energy savings. With an internal switching relay, the Smart Circuit can turn off power to the end load based on user configurable rules. Rules can be based on single or multiple Smart Circuits. These rules and their associated application include:
    • Reduce Costs - Effective when your utility has TOU (time of use) rates, where they charge a higher rate during peak times. Smart Circuits can automatically "load shift" so loads are used during off peak times.
    • Reduce Peak Charges - Commercial accounts are charged a "peak charge", which is based on the maximum amount of kilowatts used during the month, even if it was only for half an hour. Lowering your peak usage directly lowers your monthly bill. Smart Circuits can automatically "shed loads" to keep your peak usage under a threshold. For example, connect 25 Smart Circuits to your account, and configure our website to automatically turn off specific loads when the total power across all 25 Smart Circuits exceeds a threshold you designate.
    • Lower Consumption - Many utilities now have tiered pricing rates, where higher usage is billed at a higher rate. This often happens toward the end of a billing cycle, which might be daily, weekly or monthly based. Smart Circuits keep track of total consumption and can automatically turn off non-critical loads once the high rate tier is activated.
    • Manual on/off - For security reasons, rebooting servers, or while on vacation.
    Wireless
    Connect a wireless adapter (for example the Dlink DWL-G730AP or the TrendNet TEW430APB, both configured in client mode) into the Smart Circuit's Ethernet port, and the Smart Circuit can be used wirelessly.

    Please Note: It is recommended that an electrician install the Smart Circuit. It is very similar to installing a wall switch or outlet.

  • Specifications

    Manufacturer:Electronic Educational Devices
    Manufacturer Product No.:31298
    UPC:892221000217
    Dimensions:3" x 2" x 2" (8cm x 5cm x 5cm)
    Weight:0.5 lbs (0.25 kg)
    Power Rating:100-250v, 50/60 Hz, 20 amps
    Interfaces:USB, Ethernet
    Accuracy:+/- 1.5% + 3 counts
    Below 60 watts, amps and power factor accuracy degrades but accuracy of watts is maintained for the full range.
    Main Supply Voltage Fluctuation:Not to exceed +/- 10% of the nominal voltage
    Maximum Altitude:Up to 2000 meters
    Operating Temperature:5° C to 40° C
    Operating Humidity:Maximum relative humidity 80% for temperatures up to 31° C decreasing linearly to 50% relative humidity at 40° C.
    Installation Category:II
    Pollution Degree:2
    Outdoor Rated:No
    Wiring:Input and output via wiring termination block


  • Leave a Review

    You're reviewing: Smart Circuit 31298 20 Network Energy Meter and Controller

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

  • Smart Circuit 20 Network Energy Meter and Controller
  • Double gang junction box
  • Switch plate cover
  • Assorted screws and fasteners
  • Owner's manual
place your order by 3pm PT for same day shipping

Please wait...

smarthome

Item has been added to your cart
smarthome

Item has been removed from your cart