SkylinkHome WR-318 Lighting Receiver In-Wall Dimmer Switch with Transmitter, 300 Watts
Share Share Share Share Share
Rewards: 29 Points

SkylinkHome WR-318 Lighting Receiver In-Wall Dimmer Switch with Transmitter, 300 Watts

Remote Controllable In-Wall Dimmer Switch with Transmitter for Incandescent or Dimmable CFL Bulbs
  • Includes TM-318 Wireless Remote Transmitter
  • Touch-sensitive control of load
  • Simply replaces existing switch
  • No neutral wire required
  • On/Off and dimming
  • Works with incandescent & dimmable CFL bulbs
  • Three operating modes
  • Energy saving countdown mode

Item #: 73040

In Stock! SHIPS TODAY!

Special Price: $29.96

List Price: $35.95

Your Savings: $5.99

Frequently Bought Together:
+

SkylinkHome TC-318-14 Deluxe 14-Button Remote

Special Price: $16.40

List Price: $16.95

Your Savings: $0.55

Price For Both: $46.36

  • Details
  • Specs
  • Reviews
  • What's Included
  • The WR-318 Lighting Receiver In-Wall Dimmer Switch with Transmitter was designed to operate a 300 watt load at 120 volts of alternating current (120VAC) for either incandescent or CFL bulbs. Skylink's WR-318 is a kit which is comprised of the WR-001 Lighting Receiver In-Wall Dimmer Switch, 300 Watts and the TM-318 Snap-On Wireless Remote Transmitter. This switch features an On/Off or relay function as well as a dimming function which will only work with dimmable bulbs. The included remote features one button which has a toggle function turning the load on with one press and then off with a second press. Essentially it will send a command for the opposite operating mode to which the switch is currently functioning in. For example, if the switch is currently on, than the transmitter will send an off command and vice versa. Pressing and holding the button on the TM-318 transmitter will allow you to brighten and dim the attached load. Users will release the button once they notice the light is at the appropriate intensity. One CR-2032 battery will be required in order to power the TM-318 remote transmitter (included).

    To use this dimmer switch simply replace your old pre-xisting switch with the new WR-001. Being that there is no neutral wire needed for the WR-001 to operate replacing the old with the WR-001 will be as easy as disconnecting then reconnecting two wires. Once properly installed you will be able to wirelessly turn on and off, or dim and brighten lights powered by the switch locally, or remotely with the included transmitter and a variety of other SkylinkHome transmitters. This switch offers a touch-sensitive surface allowing you to control the load with a brush of your finger across the surface. The snap-on wireless remote transmitter TM-318 (included) can be used as a remote controller for this dimmer and physically attaches to the switch face. When attached, the touch-sensitive surface is covered and the TM-318 is used as a standard local control of the load. To achieve remote control over the WR-001 from any other wireless transmitter, you must first program the switch to be a responder of that transmitter. The programming is a very simple process done with the set buttons located on the switch and on the transmitter. A maximum of 8 transmitters can be paired to one WR-318 dimmer switch. This allows you to add more wireless hand-held remote controllers, or motion sensors to your system for flexibility, security, and comfort.


    The SkylinkHome System comprises a variety of wireless sensors, wireless remotes, wire-in and plug-in lighting or appliance controls. All wireless communication between SkylinkHome devices is based on rolling code technology. This ensures the highest security for your wireless signals being transmitted. For zone programming of these devices or to make this switch a member of a "Zone" (a group of lights controlled at the same time), you will need to purchase the 10 Button Deluxe Remote separately.

    SkylinkHome Receivers:

    WE-318 Lighting Receiver In-Wall On/Off Switch with Transmitter, 1,000 Watts
    WE-001 Lighting Receiver In-Wall On/Off Switch, 1,000 Watts
    PR-318 Remote Controllable Plug-In Dimmer with Repeater
    PL-318 Remote Controllable On/Off Plug-In Dimmer
    PA-318 Remote Controllable Indoor/Outdoor Plug-In On/Off Control Module
    MR-318 Remote Controllable Wire-In On/Off Control Module
    MD-318 Remote Controllable Wire-In On/Off/Dimming Control Module

    SkylinkHome Sensors & Transmitter Controllers:

    TM-318 Snap-On Wireless Remote Transmitter
    10 Button Deluxe Remote
    TC-318-1 Simple Hand-Held Wireless Remote Transmitter, 1-Button
    ID-318 Battery-Operated Motion Sensor Transmitter
    TB-318 Wireless Battery-Operated Wall Mount Transmitter

  • Specifications
    Manufacturer SkylinkHome
    Manufacturer Product No. WR-318
    UPC 623459300325
    WR-001 Input voltage 120VAC 60Hz
    TM-318 Battery type CR-2032
    Standby current 0.2mA
    Minimum load 10 Watts
    Maximum load 300W @ 120VAC
    Operating frequency 318MHz
    Operating temperature -4 to 140 degrees F
    Humidity 5% - 95%
    Range Up to 500 feet (in open area)
  • 2 Reviews

    Review of 73040 Review by AL
    Review of 73040
    Rating

    Works like a charm, easy to install & use. The touch sensor wall switch is something I wish was integrated in lamps.

    Posted on 4/15/2013

    Review of 73040 Review by DOUGLAS
    Review of 73040
    Rating

    Exactly what I needed. Used this to control detached garage lights from inside the house and it works perfectly.

    Posted on 11/27/2011

    Leave a Review

    You're reviewing: SkylinkHome WR-318 Lighting Receiver In-Wall Dimmer Switch with Transmitter, 300 Watts

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

    • 1x - WR-001 ON/OFF Wall Switch Dimmer
    • 1x - TM-318 Snap-On Remote Transmitter
    • 1x - CR-2032 battery
    • 1x - Package of wire nuts
    • 1x - User's instructions

place your order by 3pm PT for same day shipping

Please wait...

smarthome

Item has been added to your cart
smarthome

Item has been removed from your cart