Sensaphone IMS-4862 Smoke Detector
Share Share Share Share Share
Rewards: 196 Points

Sensaphone IMS-4862 Smoke Detector

Be the first to review this product

Add a Smoke Detector to the IMS-4000 System
  • Connects to a Host or Node with RJ-45 Jack
  • Sensor is automatically recognized and configured
  • Compatible with IMS-4000 System
  • Notification if disconnected

Item #: 70075

In stock - Ships Today

$98.95
  • Details
  • Specs
  • Reviews
  • What's Included
  • The Sensaphone IMS-4862 Smoke Detector Sensor is designed to connect to the IMS Host or Node and monitor for smoke in indoor environments. The electrical connection between the sensor and IMS is made via the attached RJ-45 patch cable. The sensor may be secured to a wall or ceiling (hardware sold separately). If the sensor is close to the IMS Host or Node, you can plug the sensor directly to an IMS environemtal input. If the cable is too short you can use the included RJ-45 adaptor and a longer patch cable to extend the length. For applications where the sensor may be far from the IMS unit, you may utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environmental input.


    Whether you have a small room, or a large data center, the Sensaphone IMS-4000 System provides complete monitoring for your computer facility. It is designed to monitor your entire infrastructure, which includes the environment, the physical security, and the network operation.

    The Sensaphone IMS-4000 system is a stand alone infrastructure monitoring system with an integrated voice and modem, an internal UPS, flash-disk storage, and a web server, in a simple-to-install 1U rackmountable package. From the wide array of its plug-and-play monitoring devices to its sophisticated software, the IMS-4000 is a complete, flexible, integrated system.

    Environmental Monitoring
    Monitor critical environmental conditions such as Temperature, Humidity, Smoke, Sound Level, Motion, Water, Intrusion, and Power Outages with the IMS-4000 Host and Node. Each Host and Node unit supports up to eight Environmental Sensors. When a sensor exceeds the threshold you configure (high temperature for example) you are notified by the IMS-4000 about the condition. Lights on the face of the IMS Host instantly reveal any outstanding problems. With sound level monitoring you can be notified if an audible alarm goes off, and you can remotely listen in, via the Host unit, to the server room to assess the situation yourself at any time.

    IP Monitoring
    The IMS-4000 monitors IP Devices through pinging and port availability. When a network component becomes unavailable, the IMS-4000 notifies you about which IP device is unavailable. You can monitor the status of network links, routers, printers and server'sany device which has an IP address. Each IMS-4000 Host and Node can monitor up to 64 devices. When a device does not respond to the IMS query, it contacts you immediately to alert you to the situation.

    Notification
    When a problem occurs in your network, the IMS-4000 will find you and notify you of the problem no matter where you are. Multiple communication interfaces, Ethernet port and standard telephone interface, guarantee that you get the message. You receive early notification before a problem turns into a disaster. The integrated modem / voice interface of the IMS-4000 Host means network events and environmental problems are sent to you in your own voice. When all you have is a phone, you will still know what's going on in your network. You get the message fast.

    Status
    Curious about your network? You can always obtain status information about your infrastructure - anytime, anywhere. Call into the IMS-4000 using your computer's standard dial-up networking. The IMS Console software operates the same remotely as it does locally for complete management and control of your IMS system. If you're not near a computer, then just pick up any phone and call into the IMS-4000: It will tell you in a real voice report the status of all conditions.

    Available Sensors for IMS-4000 System:

    Wireless:
    • Sensitivity: 2.0 +/- .37% - .39% /ft.
    • Heat sensor rating: Fixed 135°F (57°C) rate of rise > 15°F/min. (8.3°C/min.)
    • Maximum ambient temperature: 100°F (37.8°C)
    • Power-up time: 15 seconds
    • Housing dimensions: 6.1°x d x 1.9°" h
  • Leave a Review

    You're reviewing: Sensaphone IMS-4862 Smoke Detector

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

    • Smoke Detector
    • 14° Cat5 Patch Cable

place your order by 3pm PT for same day shipping

Please wait...

smarthome

Item has been added to your cart
smarthome

Item has been removed from your cart