- What's Included
The Sensaphone FGD-0056 Zone Water Detector and Leak Sensor is ideal for detecting water on a floor or false ceiling. via a Sensaphone 400, 800 or Web600 remote monitoring system controller. It will send a signal back to the Sensaphone controller when the presence of water hits the WaterRope sensor. It's Normally Closed output may be connected to the input of Sensaphone controller. Up to 10 lengths of water rope may be connected to create a rope with a maximum length of 100 feet. Additional rope lengths sold separately. This zone water detector is powered by 2 AA batteries (batteries sold separately).
Wiring for connecting this sensor to a Sensaphone controller is sold separately. For one-off sensor applications 20 feet or shorter consider using a 20 foot length of 2 Conductor, 22-Gauge/AWG Interconnect Wire or if you are using multiple sensors it may be more effective to by a 1,000 foot spool of 2 Conductor, 22-Gauge/AWG Interconnect Wire.
The product is deigned to cover large areas for potential water damage, for monitoring smaller, more specific areas, consider using the Sensaphone FGD-0013 Spot Water Detector and Leak Sensor.
Brand Sensaphone Manufacturer Part # FGD-0056 Connection Hardwired Housing Plastic Dimensions 5.5" x 3.3" x 1.4” (140mm x 83mm x 33mm) Sensor Series Contact Series Notes Up to 10 water ropes can be cascaded from a single sensor Normality Normally closed Maximum Number per Sensaphone Input 5 (wired in series)
- • Owner's Manual
• 1x - Zone Water Detector
• 1x - 10 Foot WaterRope
• 5x - Adhesive cable clamps • 2x - Plastic drywall anchors • 2x - #6 Metal tapping screws • 4x - Rubber feet • 1x - Owners Manual