- What's Included
If you have looked at any general purpose sensors or security sensors, you'll notice that they can't handle much current. The Double Pole Double Throw (DPDT) Form C Heavy-Duty Dry Contact Relay Module is a unit ideal for load switching, dry contact, latching output, reverse polarity, line seizure, and other uses for higher current devices. DPDT essentially means that this contact has two separate poles (or contacts) and can throw (or make) electrical contact with two separate stationary contacts to turn them on or off. You can use it to turn on multiple devices during alarm condition, trigger a 12VDC device (such as a siren) and a 120VAC device (such as a floodlight), trigger an alarm or silent alarm while disconnecting the electromagnetic door locks or to allow the two separate sets of contacts to work together to switch up to 8A of current for heavy-duty work loads A built in red LED light indicates when the relay is energized for quick reference. This product operates via 6/12/24 VDC power, programmable by on-board jumpers.
Manufacturer: SECO-LARM Manufacturer Product No.: SR-2224-C5 Relay Type: Double Pull Double Throw (DPDT), Form-C dry contacts Relay contact ratings: 5A @ 250VAC/30VDC Supply Voltage: Programmable 6/12/24VDC,
preset at 12VDC
Current Draw: 70mA when relay is active Minimum pull voltage: +/- 20% of operating voltage Dimensions: 2.48" x 1.89" x 0.83" (63mm x 48mm x 21mm) Weight: 1.94 oz. (55 g) Mounting method: Foam tape (included)
- Review of 70432 Review by JEFF
Review of 70432
Nice little compact relay to run an extra siren, strobe, lights or whatever.. very convenient and easy to use.. also the compact size lets you mount it about anywhere..
Posted on 9/3/2011
Leave a Review
1x - Double Pull Double Throw (DPDT) Form C Heavy-Duty Dry Contact Relay Module
1x - Owner's Manual
1x - Mounting Tape