- What's Included
Most home security systems rely on detecting burglaries by sensing a door or window being opened or by motion in the house. A magnetic sensor only detects when the door or window opens and a motion sensor triggers only after they've entered the home. But what happens if the burglar climbs through a broken window or glass door? By installing the 12VDC Hard Wired Glass Break Sensor your security system can instantly trigger by the sound of breaking glass. This sensor is ideal for rooms with many windows or where attaching a vibration sensor directly to the glass may not be possible. The hard wired sensor receives power from an alarm panel and contact can be wired with RF-shielded cable. It will monitor for the sound of breaking glass up to 45 feet away, depending on your installation. What really sets this apart from other similar products is the patented yellow turbulence LED that allows for fast and easy sensitivity adjustments without the need for an external test meter. The ability to fine tune the sensitivity adjustments virtually eliminates false alarms. You can use as many of these glass break sensors throughout your home and in conjunction with a security system as is necessary to provide the peace of mind you are looking for.
Glass Break Sensor Notes
•Use either Terminals 2 and 3 N.O. output or 2 and 1 for N.C. output, but not both. •Close all doors and windows when the Enforcer 12VDC Hard Wired Glass Break Sensor is in use. •Mount any optional memory buzzer, musical device or any sound generating equipment as far from the sensor as possible to reduce the detector's chance of accidental triggering, and reducing the chance of a thief finding it. •25 foot radius if ceiling mounted, 45 foot radius if wall mounted.
Manufacturer: SECO-LARM Manufacturer Product No.: ENFORCER 190 UPC 676544001058 Power: 12VDC (7.5V - 15V) Current Drain: 5mA @ 12V (standby), 80mA @ 12V (trigger) Detector Output: Dry relay contact: normally open, normally closed, common (2A) Tamper Output: Normally closed contact Yellow LED: Indicates environmental noise level Red LED: Indicates trigger signal sent to alarm Temperature Range: -14° F - 122° F (-10° C - 50° C) Case Construction: ABS plastic Dimensions: 4.5 inches x 2.8 inches x 1.1 inches (115 millimeters x 70 millimeters x 27 millimeters) Weight: 3.35 ounces (95 grams) Certifications: RoHS
- Review of 70427 Review by DEBBIE
Review of 70427
It was easy to install and we've had no problems with it.
Posted on 7/5/2009
Leave a Review
1x - SECO-LARM Enforcer 12VDC Hard Wired Glass Break Sensor
1x - Owner's Manual