- What's Included
Increase security to entryways at home or in the office by installing the SECO-LARM Enforcer Flush-Mount In-Wall Photoelectric Beam Sensor. The transmitter/receiver is designed to fit into a single-gang box for a flush mount application and the beam reflector simply mounts on the wall across from the transmitter/receiver up to 16 feet away. The transmitter/receiver and reflector will not only be attractive, they will not stick out from your wall as other similar plug-in modules will. Beam alignment is adjustable up to 15 degrees horizontally or vertically, making installation even easier. A typical application for this product is to set the beam up across an entryway or hallway in your home, office or retail shop. When the beam is broken, the sensor will turn the yellow LED light on and trigger a normally closed, normally open or common relay output on your alarm system or warning device. This product requires a 12VDC Power Supply, sold separately.
Manufacturer: SECO-LARM Manufacturer Product No.: E-932-S16RRQ Power Supply: 12V DC +/- 10% Current Draw: RX: 25mA +/- 10% (standby)
RX: 11mA +/- 10% (triggered)
TX: 37mA +/- 10%
Sensing Range: 16 feet (5 meters) Response Time: 10msec Output: Normally Closed (NC), Normally Open (NO), Common Switching Capacity: Normally [email protected] (AC/DC) Light Source: IR LED Ambient Temperature: 14°F ~ 122°F (-10°C ~ 50°C) Certifications: CE, RoHS
- Review of 70433 Review by STEVEN
Review of 70433
Although this difficult to acquire product was back ordered the communication as to an expected delivery date was excellent. It was also accurate and the product was delivered shortly afterward.
Posted on 2/20/2011
Leave a Review
1x - SECO-LARM Enforcer Photoelectric Beam Transmitter/Receiver
1x - Enforcer Beam Reflector
1x - Owner's Manual