- What's Included
Keeping your equipment on a rack is a great way to maintain all of your components in a single place, but installing and servicing equipment on a rack required moving the entire rack to get behind it. Middle Atlantic's Rotating Roll-Out Rack dispenses with these difficulties. Since the racks not only pull out but also rotate, you'll have enhanced rear access to your equipment and cabling whenever you need it, thus significantly shortening your installation and service time.
The Rotating Roll-Out Rack system allows an entire bay of equipment to pull out and rotate 60 degrees for easy installation and access to rear for servicing. The Rotating Roll-Out Rack is a patented, EIA-compliant 19-inch roll-out equipment rack for millwork installation with rackspaces and a useable depth of 20 inches. With its weight capacity of 450 pounds, the equipment rack can handle numerous heavy components.
Service tracks and a service stand are required for installing and servicing your components on this rack. Sold separately, the Service Tracks are 31 inches (no other tracks will work with this rack). Telescoping stands support and level the service tracks. Choose from a selection of height ranges from the floor: 3.5" to 11", 10" to 22", or 16" to 40", all sold separately. The telescoping service stand and tracks disconnect for storage.
Ball bearings allow for a smooth rollout, and the entire unit will lock closed using the included hardware. The rack's ventilated top accepts up to two 4" Low-Profile Fans.
Protect your cabling with a set of 100 10-32 x 3/8 Phillips Screws w/Washers. These cable-friendly screws are 3/8" long with 10-32 threads and feature a rounded end to allow wires to be dressed inside the front rackrail without chafing.
The Rotating Roll-Out Rack comes in a variety of heights. Choose from:
15 spaces (26.25" useable height)
18 spaces (31.5" useable height
21 spaces (36.75" useable height)
24 spaces (42" useable height)
27 spaces (47.25" useable height)
30 spaces (52.5" useable height
33 spaces (57.75" useable height)
39 spaces (68.25" useable height)
42 spaces (73.5" useable height)
43 spaces (75.25" useable height)
Manufacturer: Middle Atlantic Manufacturer Product No.: AX-SXR 36 Useable Height: 63" (1467mm) (36 spaces) Millwork Opening Height: 33" (838mm) Usable Depth (Frame Depth): 20" Millwork Opening Depth: 25.5" Millwork Mounting Platform Specs: 19.25" W x 25.5" D (489mm W x 648mm D) minimum, with a .50" (18mm) setback, or 27.50" (699mm) deep with 2.50" (64mm) setback Recommended Cable Clearance: 2" (51mm) minimum Rotation: 60° Rotation Clearance: 4.5" (114mm) minimum Extension Length: 31" Weight Capacity: 450 lbs. Materials: Top, base, caster brackets, roller base, and horizontal braces: 13-gauge steel with black powder-coat finish; rack uprights: 11-gauge steel rackrail with tapped 10-32 mounting holes in universal EIA spacing
Leave a Review
- Rotating Rack frame
- Internal system base
- Cable management system
- 10 lacer bars (5 for rack and 5 for rough-in pan)
- 10-32 hex-drive screws with ball driver provided
- Millwork mounting material
- Rough-in pan assembly
- Rotating Rack frame