I/O Linc - Insteon Low Voltage / Contact Closure Interface ( 1 In / 1 Out )
Share Share Share Share Share
Rewards: 33 Points

Refurbished I/O Linc - Insteon 2450 Low Voltage / Contact Closure Interface ( 1 In / 1 Out )

Expand your Insteon Network to monitor and control low voltage and contact closure devices
  • Monitor and control pool valves, electric door strikes, garage doors and more using your Insteon network
  • 4 output relay modes allow you to control many different types of devices
  • Control Insteon lights and appliances using standard sensors
  • Contains 1 sensor input and 1 output relay (NO/NC)
  • Award-winning Insteon technology provides superior performance and reliability
  • This product is refurbished and sold as-is - see note below for details


  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • Insteon Factory refurbished to original Insteon specifications. All original accessories and guides/manuals are included. Includes Limited 30 Day Warranty*. May not have original packaging and may have minor cosmetic imperfections.

    * All sales are final. Only exchanges will be accepted for defective products.

    The latest Insteon plug-in module, I/O Linc, lets you monitor and control any low voltage devices such as alarm sensors, electric door strikes, and contact closures as part of your Insteon home automation network. With one dry-contact sensor input you can control many Insteon devices throughout the house. Plus, use the built-in single-pole double-throw (SPDT) switch, connect any low voltage-powered device for continuous or momentary operation. Create your own remote-control door lock using an electric door strike and power supply or use a security sensor turn Insteon controlled lights on or off.

    Required Accessories
    Sensor wire: 16 - 28 gauge wire fits, but 20 - 22 gauge recommended

    I/O Linc Kits Available:
    I/O Linc's flexible output relay can control many different types of low voltage devices, from pool valves to electric door strikes to garage doors due to its different relay modes. When controlling devices like pool valves, you will want the ability to leave it on for an extended period of time, giving it plenty of time to fill the pool. As it approaches the desired water level, then you can remotely turn it off. For devices like electric door strikes, set I/O Linc's output relay to momentary, allowing you open the front gate using a RemoteLinc or any other Insteon controller. A third version of I/O Linc's momentary mode allows you to remotely press your garage door button with an Insteon On command, but only if your garage is currently closed. This allows you to open your garage with On command and close it with an Off command. Because I/O Linc uses a garage door sensor to know whether the door is open or closed, it only controls the garage when it needs to.

    Controlling Two Separate Loads
    With the addition of a DPDT Relay Board, the I/O Linc is capable of switching two separate loads on and off together. In this configuration, the I/O Linc could control two different loads of varying voltages (i.e. one high voltage and one low voltage load) or two higher current loads (up to 7A @30VDC each).

  • Specifications

    Brand: Insteon
    Manufacturer Product No.: 2450, I/O Linc
    UPC: 689076403542
    Patent No.: U.S. Patent No. 7,345,998, International patents pending
    Color: White
    Warranty: 2 years, limited
    Status LED: White (Bright when relay closed, dim when relay open)
    Sensor Status LED: Green (On when sensor closed, Off when sensor open)
    Set Button: Toggles output relay On/Off. Also used for setup.
    Momentary Duration: Locally Adujtable: 2 Seconds to 30 Minutes; Software Adjustable, .2 Seconds - 105 minutes
    Operation Modes: Insteon
    Multi-Way Circuit Support: Yes
    Setup Memory: Non-volatile EEPROM
    Insteon Features
    Insteon Addresses: 1 hard-coded out of 16,777,216 possible
    Insteon Links: 417
    Insteon Powerline Frequency: 131.65 KHz
    Insteon Minimum Transmit Level: 3.2 Vpp into 5 Ohms
    Insteon Minimum Receive Level: 10 mV
    Insteon Messages Repeated: Yes
    I/O Terminals: 5V (10mA), GND, Sense, N/C, N/O, Common (28-16 gauge wire)
    Input jack: 1/8" mini jack input (GND, Sense)
    Input Type: Contact closure only
    Output Relay Capacity: 5A @ 30 Volts (AC or DC)
    Operating Conditions: Indoors, 32 to 104°, up to 85% relative humidity
    Dimensions: 4.5" H x 2.5" W x 1.5" D
    Weight: 4.6 oz
    Supply Voltage: 120 Volts AC +/- 10%, 60 Hertz, single phase
    Sensor Input: 1/8" mini jack input (GND, Sense)
    Power Plug : 3-pin grounded
    Pass-through Outlet: Uncontrolled 3-prong (with ground), 120V, 15A
    Power Consumption: 0.93 Watts
    Certification: Safety tested for use in USA and Canada

  • Leave a Review

    Only registered users can write reviews. Please, log in or register

  • Manufacture Information:
    •  Quick Start Guide
    •  Owner's Manual
    • I/O Linc
    • 1.5mm flathead screwdriver
    • Quick-Start Guide
place your order by 3pm PT for same day shipping

Please wait...