The OnQ legrand AU7398 lyriQ Single Source Input typically resides at the entertainment center and is connected to the enclosure mounted Audio Distribution Module using a single Cat 5 cable run. This Single Source Input requires line level output from the audio source being distributed. If your receiver does not have a dedicated line level or preamp output, use the tape monitor output. The Single Source Input provides RCA jacks for audio source equipment connection. The line level audio signal is sent to the Audio Distribution Module over the Cat 5 cable. IR signals that are transmitted to any Cat 5 Audio Volume Control within the system are directed to source equipment using IR emitter cables that plug into the three 2.5mm jacks on the Single Source Input.
The Single Source Input, is an integral part of the Cat 5 Audio System. It is a component which, when combined with other essential components and your source equipment receiver, CD player, etc, creates a versatile whole-house audio system that will fill your rooms with high-quality sound for years to come. Category 5 technology is a new, innovative method of providing high quality audio to remote locations with a single 8-conductor cable such as Category 5. This technology provides many advantages over other conventional methods of audio distribution such as simple, single Category 5 wiring scheme, and infrared control of system components.