- What's Included
The On-Q/Legrand Selective Call 8-Location Distribution Module is the main hub of the Selective Call Intercom System.
The OnQ Selective Call Intercom Distribution Module is required for building a Selective Call Intercom Distribution System. This distribution module supports up to eight room units. Intercom units connect to the distribution module using Cat. 5 cable. If you need more than eight communication points, simply add up to three more distribution modules (sold separately); this will give you the ability to add an additional 24 communications points (eight per distribution module). This distribution module requires an OnQ PW1030 Selective Call Intercom Power Supply (sold separately).
Selective Call 8 Location Distribution Module: This module is typically installed in the On-Q enclosure and is considered the System Command, Communication and Power Router of the system. All Room Units, Patio Units, and Door Units are connected directly to the Module via "home run" style single Cat 5e cabling. The Intercom Module also supplies power to the entire SCI System. Up to eight units of any combination are supported by each module, and modules may be cascaded three times, for a total system support of up to 32 units.
Selective Call Room Unit: Through the LCD display; this unit provides both basic intercom communication functions such as talk, talk to door (if Door Unit is installed), monitor, mute, and advanced functions such as dynamic sorting of users or monitoring multiple rooms at the same time. Up to 8 Selective Call Room Units can be installed per Selective Call Intercom Module and up to 32 per system.
Selective Call Patio Unit: This unit also provides similar basic Room Unit functionality in a weather resistant wall mounted package for your patio. For security reasons, it does not support the door release function. There are no specific limits as to the mix of Room Units and Patio Units up to the physical limitation of 8 per module and 32 per system.
Selective Call Door/Video Door Unit: This unit allows a visitor to the home to press the door chime button on the unit to notify the occupants of their presence. The occupants can then initiate a two-way communication with the visitor, see the visitor (Video Door Unit only), and even open the door (requires electronic door release device, not included). Up to 20 different door tones can be selected as the door tone that is played when the door chime button is pressed. There are no limits to the mix of Room, Patio and Door Units up to the physical limit of 8 per Distribution Module and 32 per system.
Note: Each of the room units will need a double-gang low voltage bracket or junction box to install in the wall. Door and Patio units will need an outdoor rated double-gang low voltage bracket or junction box to install in the wall.
General Brand OnQ Brand Product No. IC5010 UPC 804428008972 Dimensions L 7.2" x W 4.5" x H 3.5"/td> Weight 2 lbs Technical Cat5 Cable Rating CAT5 UTP, 4 pair solid conductor (24 AWG)/td> Humidity Up to 90% RH (non-condensing) Material Subplate Material - ABS Plastic Operating Temperture 0 to 55ºC Power Requirements +24Vdc, +/-1.5Vdc, 2.5 A max Q Link Selective Call Ports RJ-45 Storage Temperature -25 to 75ºC
• Owner's Manual
- • 1x - IC5010 Distribution Module • 1x - Instruction Manual