Niles Audio MF1 IR MicroFlasher
Share Share Share Share Share
Rewards: 11 Points

Niles Audio MF1 IR MicroFlasher

Use with a Niles IR Repeater Main System to Transfers an IR Signal to Hidden Components
  • Miniature Size
  • Easy Hook-up
  • Secure Adhesive Mounting
  • One MF1 Required For Each Component You Wish To Control
  • Transparent To Infrared Light
  • Low Profile, Extremely Small Footprint
  • 10' Cable with 3.5mm Plug for Easy Installation
  • Infrared Blocker Included
  • Includes Improved Elastomer Style Blocking Cover to Facilitate Installation On Curved Surfaces
  • Improved, Stronger Adhesive
  • Packaged For Retail Display
  • Dimensions: 5/16" Wide X 3/16" High X 1/2" Deep

Item #: 6756

Product is on backorder

  • Details
  • Reviews
  • The Niles Audio MF Series MicroFlashers are one of three elements that make up an infrared extender system:
    A 6 Sensor IR Expansion Hub, Model IRH610, is available to provide additional sensor inputs to your system.

    When an IR remote sensor receives a command from a hand-held remote control, it sends a corresponding electronic signal through a wire to the main system unit. Here, the main system unit cleans and amplifies the electronic signal. Finally, the main system unit outputs the signal to the IR flasher which transmits the infrared command to the audio/video component you wish to control.

    The MF MicroFlasher sends the IR commands via flashes of infrared light in a precise pinpoint pattern from its single infrared LED. The output is extraordinarily accurate throughout a wide bandwidth. This allows the MF MicroFlasher to control most makes and models of IR controlled audio/video components.

    Additional Features and Benefits
    • Miniature and discrete, the MF MicroFlashers mount directly to the IR remote sensor window of your audio/video component without disfiguring the appearance of your equipment.
    • The MF Series is completely transparent to IR commands. Although the flashers appear to block the IR remote sensor window of your audio/video component, you can still directly operate your equipment using a remote
    • All MicroFlashers come equipped with a 3.5mm mono mini-plug. This provides
      you with easy hookup for fast, trouble-free installations.
    • All MicroFlashers have a strip of self-adhesive tape for quick and secure mounting to any hard, clean, dry surface.
    • All MicroFlashers are supplied with an ample 10 feet of connecting wire.
    • The MF1 and MF2 are supplied with an infrared blocking cover. This is useful if you have several identical TV's (or audio/video components), all using the same remote control and the same IR commands.
    • The MF2 and MF2VF provide dual flashers on a single cable for simplified wiring or easy expansion of a main system units flasher outputs.
    • The MF1VF and MF2VF provide visible feedback of flasher operation via a red LED in the flasher housing.
  • 6 Reviews

    Review of 6756 Review by DAN
    Review of 6756

    Great product, works very well.

    Posted on 1/4/2014

    Review of 6756 Review by SCOTT
    Review of 6756

    Nice, the self-adhesive surface keeps it in place.

    Posted on 4/20/2012

    Review of 6756 Review by MARIO
    Review of 6756

    The IR blocking cover is really good.

    Posted on 10/30/2011

    Review of 6756 Review by MARY
    Review of 6756

    Good, i think since i buy a lot from you guys that you should do a thing where you get points everytime you order and let them work towards getting something free or a discount or something b/c it would also make people wanna go to and order from you b/c they get something out of it other then ordering from another company

    Posted on 9/15/2011

    Review of 6756 Review by ROBERT
    Review of 6756

    Easy to set up. Works great.

    Posted on 8/14/2011

    Review of 6756 Review by ROBERT
    Review of 6756

    The MF1 is a bit less expensive than the MF1VF which includes a visible feedback LED. I had a failure in my IR system and suspected the MSU250. I was wrong. The MF1 had failed because it had been inadvertently plugged into the 12VDC output which burned it out. I recommend the MF1VF. Both units come with a little adhesive pad the size of the unit. It is too small to provide adequate adhesion. I recommend using silicon glue not only to adhere the MF1VF but also the cable back to the MSU250.

    Posted on 1/2/2011

    Leave a Review

    You're reviewing: Niles Audio MF1 IR MicroFlasher

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

Norton McAfee
place your order by 3pm PT for same day shipping

Please wait...


Item has been added to your cart

Item has been removed from your cart