- What's Included
This speaker is designed to be installed in any standard ceiling. There are two considerations for placing your speakers; ease of running the cable to the loudspeaker and coverage of the loudspeaker. The best stereo effect will be achieved if the loudspeaker is placed in the center of the listening area. Avoid installing the loudspeaker near a corner to prevent a 'boomy' or diffracted sound. CM700 series speakers will cover an area of a circle with a 16-foot diameter when mounted at an 8-foot height.
Running Wire in Walls or Ceilings
When running speaker wire inside walls or ceilings, use special jacketed cable (a minimum of 18 to 16-gauge two-conductor CL-2 or CL-3 rated loudspeaker wire) to protect the wire and for fire prevention. In some areas, conduit is also required. For a trouble-free installation, low-voltage wire such as loudspeaker wire must be run in accordance with the National Electrical Code and any applicable provisions of the local building code. If you are unsure of the correct installation techniques, wire jacket, or type of conduit to use, consult a professional audio/video installer, building contractor, or the local building and inspection department.
Specifications Manufacturer Niles Audio Manufacturer Product No. CM730Si, FG01304 UPC 760514013049 Construction 7" polypropylene woofer with treated urethane surround and two pivoting fluid-cooled 19mm UltaSilk tweeters Recommended Amplifier Power 10 To 100 Watts Frequency Response 60Hz To 21kHz +/-3dB Impedance 8 Ohm Nominal;6 Ohm Minimum Sensitivity 89 dB with 2.83 V pink noise input measured at 1 meter on axis Frame Dimensions 9-1/4" (23.5cm) Diameter Hole Cutout Dimensions 8" (20.3cm) Diameter Depth Behind Ceiling 4-3/8" (11cm) Warranty Manufacturer Lifetime Limited
Leave a Review
- 1x - loudspeaker
- 1x - Aluminum MicroPerf Grille
- 1x - Cardboard paint mask/hole cutout template