Mini Remote Wall Mount Bracket
Share Share Share Share Share
Rewards: 5 Points

Insteon Mini Remote Control Wall Mount Bracket

Mount a Mini Remote on Any Wall in Your Home
  • Wall mount your Mini Remote anywhere
  • Gang two or more together for more control
  • Can be installed adjacent to existing wired-in switches
  • Mini Remote can easily be removed for portability or recharging
  • Use with any decorator wallplate


REWARDS: 5 points
Frequently Bought Together:
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • Wall mount your Mini Remote switch or keypad on any wall. Simply mount the wall bracket with included screws and cover with a decorator wallplate (sold separately), then snap-in your Mini Remote. Works with any decorator wallplate although we recommend the Aspire screwless wallplates.

    Multiple brackets can be mounted side-by-side, allowing you to have 2, 3 or more Mini Remotes in a single location.

    Want to mount Mini Remote next to an existing switch? No problem! Just purchase a multi-gang wallplate and mount the bracket to the back of it, screw the wallplate in place and snap Mini Remote into the opening.

    Note: the Mini Remote is not rated for placement directly over open junction boxes.

  • Brand: Insteon
    Manufacturer Product No.: 2444B4
    Dimensions: 1.8"W x 4.2"L x 0.125"H
    Weight: 0.02 lbs.
    UPC: 813922012170
    Warranty: 2 years, limited

  • Reviews 1 - 10 of 66

    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. ...
    7. 7
    Too Loose Review by Mark
    Too Loose

    I agree with all of the other reviews. This bracket is far too loose to securely hold the remote. It's very floppy inside the bracket. I mounted the bracket to the back of a double gang Decora style wall plate, which I then mounted over a single gang box with another SwitchLinc. With the remote in place, it looks like a double switch. The remote does have sheetrock behind it. To correct the floppy issue, I cut a thin strip of gaffer's tape and put it on one side of the remote, covering the back half of the edge of the remote (where the grooves are that engage the small dots on the bracket). When I returned the remote to the bracket, I found that this little strip of tape was just enough to cause the remote to snap into the bracket. Now, it's very secure, but still easily removable, and you can't see the tape.

    Posted on 11/9/2015

    Doesn't fit snugly Review by oktane
    Doesn't fit snugly

    Too loose, falls out easily, must be glued, which makes charging a disaster. How hard could this be to design properly?

    Posted on 6/7/2015

    2444B4 Review by Bob

    Product works well until you push a button. Great idea, but terrible design. Remote presses into the wall box if you push the button with anything more than a very light touch.

    I hope interesting on comes up with an upgrade.

    Posted on 1/14/2015

    Does NOT Work - Be Warned Review by Jason
    Does NOT Work - Be Warned

    I should have read the reviews before I purchased this, but you would think something as simple as a bracket would just fit what it is designed for. Unfortunately, I did does NOT fit. Like almost all reviews, it falls through the hole for me when touched. I was mounting it in a low voltage box with no backing. I guess I will have to try and rig some type of backing to hold it in place. Wasn't that suppose to be the purpose of this bracket in the first place?

    Posted on 9/16/2014

    Review of 2444B4 Review by AMEET
    Review of 2444B4

    does what it's supposed to do.

    Posted on 8/8/2014

    Review of 2444B4 Review by KATHI
    Review of 2444B4


    Posted on 7/23/2014

    Review of 2444B4 Review by CHRIS
    Review of 2444B4

    Fits very loose in the outlet. Will need to modify with some type of backing. usb port is covered when in the holder - must remove to charge.

    Posted on 6/12/2014

    Review of 2444B4 Review by ROBERT
    Review of 2444B4

    Mini remote does not fit snugly into bracket - useless

    Posted on 4/19/2014

    Review of 2444B4 Review by JARED
    Review of 2444B4

    Terrible ... Doesn't hold switch well. It doesn't fit into an outlet box.. Complete fail!!!! Switch falls out of it. Can't glue switch in because it needs to be recharged over once in a while

    Posted on 2/15/2014

    Review of 2444B4 Review by RICARDO
    Review of 2444B4

    WOrks just as advertised.

    Posted on 1/20/2014

    Leave a Review

    You're reviewing: Insteon Mini Remote Control Wall Mount Bracket

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

    • Mini Remote Wall Mount Bracket
    • Two Screws
    • Two Anchors
    • Quick Start Guide
place your order by 3pm PT for same day shipping

Please wait...