LuxPro PSPU721T 2H/1C Touchscreen Programmable Thermostat
Share Share Share Share Share
Rewards: 75 Points

LuxPro PSPU721T 2H/1C Touchscreen Programmable Thermostat

Be the first to review this product

Digital Touchscreen Programmable Thermostat can Save Money and Energy
  • Large dot-matrix LCD touchscreen display with backlight
  • Touchscreen makes operation and programming easy
  • Energy Watch reports operating hours and cost
  • Filter monitor reminds you when to change filters
  • Comaptible with most heat pump systems, including dual fuel
  • Powered by the HVAC system
  • 2 heating and 1 cooling stage
  • Programmable vacation setting

Item #: 29930

Ships in 1 to 2 days

$75.90
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • Upgrade your HVAC system with this touchscreen programmable digital thermostat. Its large 4.2" diagonal dot matrix LCD display is easily read, even at night with its backlight. Enter up to four separate time and temperature events per day for heating and for cooling using easy touchscreen commands. Can display either degrees F or C with just a simple setting. Program the number of operating hours recommended by your system's manufacturer for filter changes, and your thermostat will display an icon to remind you. Pre-programmed 5-minute compressor protection prevents damage from cycling the compressor too quickly. This thermostat is powered by the 24VAC from your HVAC system.

    Advanced features allow you to calibrate this thermostat so it agrees with another thermometer in the room. You may also adjust the variation in temperature allowed before turning on your heater of air conditioner. And you can set it to display in either degrees F or C. You may program the thermostat to not allow any inputs from the keypad without a password, or you may choose inputs limited to only temperature settings. Works with 24VAC gas, oil, or electric heating and air conditioning systems and single- and two-stage heat pumps.


    Energy Watch
    This technology reports your HVAC system's run hours and operating cost for the past month or longer, up to 255 days. Program the local utility rates for electricity and gas for accurate cost reporting. Display indicates compressor run time, furnace run time, fan run time, system total run time, and system operating cost.

    Easy Programming
    Entering custom programs is simple using the touchscreen for inputs, and is made even easier with a copy feature: enter one day, then press a key to copy to other days.

    Security
    You may program the thermostat to disallow any inputs from the keypad without a password, or you may choose inputs limited to only temperature changes.

    Filter Monitor
    The Filter Monitor screen shows total run time since the last filter change. When the system reaches the set number of operating hours, an icon appears on the screen to remind you that it's time to clean or replace your filter.

  • Specifications
    Manufacturer LuxPro
    Manufacturer Product No. PSPU721T
    Power Requirement 24VAC from HVAC System
    Contact Rating 2A each
    LCD Display 4.2" Diagonal Touchscreen with Backlight
    Setpoint Temp Range 45° to 90°F (7° to 32°C)
    Temperature Accuracy ±1°F
    Operating Temperature 14° to 122°F (-10° to 50°C)
    Operating Humidity 20% to 90% Non-Condensing
    Wiring Terminals RC, RH, C, Y1, Y2, G, W2, O/B/W, DH, H, 11, 12
    Dimensions 6.5" x 4.6" x 1.25"
    Mfgr Warranty 3 years, limited

  • Leave a Review

    You're reviewing: LuxPro PSPU721T 2H/1C Touchscreen Programmable Thermostat

    • 1 star
      2 stars
      3 stars
      4 stars
      5 stars

    * Required Fields

    • 1x - 2H/1C Touchscreen Thermostat
    • Wire Identification Stickers
    • Mounting Screws & Wall Anchors
    • 1x - Instruction Manual

Norton McAfee
place your order by 3pm PT for same day shipping

Please wait...

smarthome

Item has been added to your cart
smarthome

Item has been removed from your cart