There is no need to worry about the complicated process of creating your own IP network to keep your home safe. This network camera offers one of the easiest, most cost-effective solutions for remote video monitoring. Once the camera is installed, create a LiveLine account to activate the camera. You'll then be able to stream live footage from your camera 24 hours a day, from any web-enabled computer or device. This network camera allows up to three streams simultaneously for added flexibility. As long as you are able to access the internet, you'll be able to see what your camera sees.
Learn more about IP Cameras.
Specifications Manufacturer LiveLine Manufacturer Product No. AVC2200 UPC 816045010009 Image Sensor 1/4" Color SMOS sensor Resolution 640x480 Minimum Illumination 0.5 Lux Lens Type Board Lens Aperture (F/No.) 2.8 Focus Length 4.5mm View Angle (Diagonal) 60 degrees Compression MPEG4/MJPEG dual streaming Auto White Balance Yes Auto Exposure Control Yes Auto Gain Control Yes Image Resolution and Frame rate VGA (640x480) : 30 fps/QVGA (320x240) : 30fps/QQVGA (160x120) : 30 fps Multi-Profile 3 profiles simultaneously Network Processor ARM9 base System ROM 8 MByte NOR Flash Power DC5V System RAM 32 MByte SDRAM Power Consumption 8 Watts maximum Approvals CE/FCC class B Environment Operation Temp: 0 to 45 degrees C
Operation Humidity: 20 to 85% non-condensing
Storage Temp: -15 to 60 degrees C
Storage Humidity: 0 to 90% non-condensing
Audio In Internal Omni-directional Microphone
Sensitivity: -48dB +/- 3dB
Freq Response: 50~16000Hz
Audio Out External Audio output to active speaker;Mono Echo Cancellation Hardware voice processor Audio Codec PCM/AMR Ethernet One RJ45 port;IEEE 802.3u compliant 10/100 Mbps Fast Ethernet with Auto-MDIX Wireless N/A (Wired) Supported Protcols TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, Samba, PPPoE, UPnP, Bonjour, RTP, RTSP, RTCP Power LED Orange color Link/act. LED Green color Reset button Push and hold over 5 seconds will Factory Reset USB Port One Type A receptacle Connector USB 1.1 Host port (Power Distribution: 500mA Max.) USB dismount button Push and hold over 4 seconds will dismount USB device Night vision IR LED with light sensor control Antenna N/A
Leave a Review