Special Price: $150.96
List Price: $207.49
Your Savings: $56.53
Special Price: $250.15
List Price: $333.40
Your Savings: $83.25
Price For Both: $401.11
This 4-channel receiver will allow you to control and bridge communications between your hard-wired and wireless Leviton devices. You'll be able to control up to four separate devices or scenes and can even program all your lights to respond to a single master switch to save energy. The LevNet Low Voltage Relay Receiver is compatible with single and dual rocker self-powered wireless light switches, dual rocker handheld remote and key card access switches.
To program, the receiver must be receiving power and after programming the setting will be retained even when power is disconnected. While programming the sensitivity of the receiver will be reduced while in Learn Mode to prevent associating with unwanted transmitters. Transmitters should be within 15ft of the receiver when programming and the LevNet Relay Receiver can be paired with as many as 80 transmitters.
Specifications Manufacturer Leviton Manufacturer Product No. WSPAS-LV4 UPC 078477484883 Range 50-150 feet (typical) Frequency 315MHz Relay Output 0-30 VAC or 0-30 VDC
Power Supply 8-28 VAC or 8-30 VDC
Output Channels 4 Memory Stores up to 80 switch IDs Dimensions 5.12" x 3.21" x 1.1" (10cm x 7.2cm x 2.9cm) Operating Temperature -13 to 140 degrees F Storage Temperature -40 to 140 degrees F (-40 to 60 degrees C) Radio Certification FCC (United States): SZV-TCM2XXC
IC (Canada): 5713A-TCM2XXC
- Review of 86568 Review by BENJAMIN
Review of 86568
This item is not compatible with occupancy sensors. Why release a relay device if it is not compatible with energy saving devices, such as the LevNet Occupancy Sensor?
Posted on 11/30/2013
- Review of 86568 Review by NOBORU
Review of 86568
I sutisfied with quick delivery time.
Thank you very much.
Posted on 1/26/2013
Leave a Review