UPB House Status Switch
Share Share Share Share Share
Rewards: 184 Points

Leviton Security & Automation HL382-W UPB House Status Switch

Control Every UPB Light in the Room from One 8-Button Keypad
  • Communicates with other UPB devices
  • Utilizes existing electrical wiring
  • Links UPB wall switches into lighting scenes
  • Formerly an HAI product


  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • Control every light in the room from a single location. The Leviton Security & Automation UPB House Status Switch allows for lighting control of a room where UPB Wall Switches (sold separately) have been installed. This eight-button room controller sends signals to each UPB wall switch over the Universal Powerline Bus (UPB) protocol, an advanced communication technology that uses your existing power wires, so no rewiring is necessary in order to use this controller. The UPB House Status Switch mounts in a standard wall electrical box, and it uses a standard Decora wall plate (sold separately). Please note: UPB products are NOT X10 compatible.

    The UPB House Status Switch has eight push-buttons, which are used to control lighting scenes. Each push-button is backlit so that the buttons can be seen in a dark room, and each can be configured to custom fit your lifestyle. The UPB controller is capable of storing preset light levels and fade rates to create lighting scenes. If you have UPB Wall Switch Dimmers installed, you can press and hold the linked button to brighten or dim the linked light.

    Setting a scene, such as reading, watch TV, or dining, is easy and does not require any programming or software. The scenes buttons use a feature of UPB called "links" that enables switches and room controllers to memorize scenes without a central controller.

    UPB benefits include its higher reliability, since its signal strength is stronger than X10, with increased electrical noise resistance. UPB technology allows enough individually addressable devices to control even large residential environments, usually without the need for phase coupling and without affecting or being affected by adjacent home environments. Please note that the UPB Wall Switch does require the use of the white neutral wire, where most standard switches have no connection for the neutral.

    In 2012, HAI was acquired by Leviton, with the transitional name, “HAI by Leviton” applied. Mid 2013, “Leviton Security & Automation” was formalized.

    The previous HAI part number for this product was 38A00-2.
  • Specifications

    Product No.:HL382-W (Formerly HAI Part # 38A00-2)
    Dimensions:4.1" x 1.7" x 1.5"
    Weight:0.25 lb.
    Backlit Pushbuttons with LED Indicators:8
    Connections:18 GA
    Mounting:Standard J box
    Input Power:120 ± 12 VAC
    Input Frequency:60 ± 3 Hz
    UPB Transmission Attempts:2
    Operating Temperature:-40°F to 104°F
    Approvals:UL listed
  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • Keypad
    • Mounting hardware
    • Instructions
place your order by 3pm PT for same day shipping

Please wait...