- What's Included
Control every light in the room from a single location. The Leviton Security & Automation UPB Scene Switch Room Controller allows for lighting control of a room where UPB Wall Switches (sold separately) have been installed. This six-button room controller sends signals to each UPB wall switch over the Universal Powerline Bus (UPB) protocol, an advanced communication technology that uses your existing power wires, so no rewiring is necessary in order to use this controller. The UPB Room Controller mounts in a standard wall electrical box, and it uses a standard Decora wall plate (sold separately). Please note: UPB products are NOT X10 compatible.
The Leviton Security & Automation UPB Scene Switch has six push-buttons labeled "ON", "A", "B", "C", "D", and "OFF", which are used to control lighting scenes. Each push-button is backlit so that the buttons can be seen in a dark room, and each can be configured to custom fit your lifestyle. The UPB Scene Switch is capable of storing preset light levels and fade rates to create lighting scenes. If you have UPB Wall Switch Dimmers installed, you can press and hold the ON or OFF button to brighten or dim the linked light.
Setting a scene, such as reading, watch TV, or dining, is easy and does not require any programming or software. The scene buttons use a feature of UPB called "links" that enables switches and room controllers to memorize scenes without a central controller.
UPB benefits include its higher reliability, since its signal strength is stronger than X10, with increased electrical noise resistance. UPB technology allows enough individually addressable devices to control even large residential environments, usually without the need for phase coupling and without affecting or being affected by adjacent home environments. Please note that the UPB Wall Switch does require the use of the white neutral wire, where most standard switches have no connection for the neutral.
In 2012, HAI was acquired by Leviton, with the transitional name, “HAI by Leviton” applied. Mid 2013, “Leviton Security & Automation” was formalized.
The previous HAI part number for this product was 38A00-1.
HAI Product No.: HL381-W (Formerly HAI Part # 38A00-1) UPC: 872257001952 Dimensions: 4.1" x 1.7" x 1.5" Weight: 0.25 lb. Backlit Pushbuttons with LED Indicators: 6 Connections: 18 GA Mounting: Standard J box Input Power: 120 ± 12 VAC Input Frequency: 60 ± 3 Hz UPB Transmission Attempts: 2 Operating Temperature: -40° F to 104° F Approvals: UL listed
- Mounting hardware